Manual for Dishwasher Whirlpool

User Manual & Installation Guide

14 Place Settings

Installation Guide

Tools Needed:

  • Adjustable wrench
  • Level
  • Screwdrivers (flat and Phillips)
  • Pipe wrench
  • Tape measure
  • Drill

Step-by-Step Installation

  1. Choose Installation Location: Select a location near water supply, drain, and electrical connections on a solid, level floor.
  2. Remove Shipping Materials: Remove all shipping bolts, brackets and packaging materials from the dishwasher.
  3. Connect Water Supply: Connect hot water supply line to the water inlet valve. Use only new braided stainless steel hoses.
  4. Connect Drain Hose: Route the drain hose into the sink drain or garbage disposal with a high loop to prevent backflow.
  5. Electrical Connection: Connect to a properly grounded 120V, 15A, AC only dedicated circuit. Do not use an extension cord.
  6. Level the Dishwasher: Adjust the leveling legs to ensure the dishwasher is level from front to back and side to side.
  7. Test Run: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Warning: All installations must be performed by a qualified installer to ensure proper operation and maintain warranty coverage.

Specifications

Model Series WDF540PADM
Type Built-in Dishwasher
Color Stainless Steel / Black
Capacity 14 Place Settings
Noise Level 46 dB
Control Type Touch Controls with LED Display
Energy Rating ENERGY STARĀ® Certified
Water Consumption 2.9 gallons per cycle
Power Requirements 120V, 60Hz, 15A
Dimensions (HxWxD) 34.5 x 23.8 x 24.5 inches
Weight 75 lbs
Wash Cycles 6 Wash Cycles

Warranty Information

  • Full Warranty: 1 year parts and labor
  • Motor Warranty: 10 years on Direct Drive Motor
  • Racks & Tub: Lifetime limited warranty
  • Additional Coverage: Optional extended warranty available

For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com

Key Features

Soil Sensor

Advanced sensor technology detects how dirty your dishes are and automatically adjusts the cycle time and water usage for optimal cleaning performance.

Third Level Rack

Extra rack provides additional space for cutlery, utensils, and smaller items, maximizing loading capacity and organization.

Power Clean Cycle

Intensive cleaning cycle with high-pressure jets and extra hot water to remove tough, baked-on food from pots and pans.

Quiet Operation

Sound insulation and advanced motor technology provide whisper-quiet operation at only 46 dB, quieter than normal conversation.

Sanitize Cycle

NSF certified cycle uses high-temperature water to eliminate 99.9% of food soil bacteria for hygienically clean dishes.

Hard Food Disposer

Built-in food grinder eliminates the need to pre-rinse dishes by breaking down food particles during the wash cycle.

Wash Cycles Explained

Auto Cycle

Automatically adjusts time and temperature based on soil level detection

Heavy Cycle

Intensive cleaning for heavily soiled pots, pans, and baking dishes

Normal Cycle

Standard cleaning for everyday dishes with normal food soil

Light Cycle

Quick wash for lightly soiled dishes with reduced water and energy use

Rinse Only

Quick rinse to prevent food from drying on dishes between loads

Sanitize Cycle

High-temperature wash to eliminate bacteria and germs

Troubleshooting

Problem Possible Cause Solution
Dishwasher won't start Power issue, door not closed properly Check power supply, ensure door is latched completely
Poor cleaning results Overloading, wrong detergent, incorrect loading Reduce load size, use correct detergent, ensure proper loading
Water not draining Drain hose clogged or kinked, filter blocked Check drain hose for obstructions, clean filter system
Leaking water Door not sealed, overfilling, loose connections Check door seal, ensure proper detergent amount, check connections
Unusual noises Foreign objects in pump, spray arm obstruction Check for foreign objects, ensure spray arms rotate freely
Dishes not drying Rinse aid empty, heating element issue Refill rinse aid, check heating element operation

Error Codes

  • F1: Water supply issue - Check water supply and inlet valve
  • F2: Drain issue - Check drain hose and pump
  • F3: Temperature sensor issue - Contact service center
  • F4: Heating element issue - Contact service center
  • F5: Motor issue - Contact service center
  • F6: Control board issue - Contact service center

Manual Downloads

Current Model Manuals

WDF540PADM

14 Place Settings Dishwasher

WDT730PAHZ

15 Place Settings Dishwasher

WDP370PAHW

13 Place Settings Dishwasher

WDT910SSY

16 Place Settings Dishwasher

Popular Previous Models

WDF760SADM

14 Place Settings Dishwasher

WDT720PADM

15 Place Settings Dishwasher

WDF760SAYM

14 Place Settings Dishwasher

WDT750SAHZ

15 Place Settings Dishwasher

Note: For models not listed here, please visit the Whirlpool Support Website for complete documentation.