wdt750sahz0 service manual

Technical Service Manual & Repair Guide

Whirlpool Dishwasher

Installation Guide

Tools Needed:

  • Adjustable wrench
  • Level
  • Screwdrivers (flat and Phillips)
  • Pliers
  • Tape measure
  • Pipe wrench

Step-by-Step Installation

  1. Choose Installation Location: Select location under countertop with access to plumbing and electrical connections on a solid, level floor.
  2. Remove Shipping Materials: Remove all shipping bolts, brackets and packaging materials from the dishwasher.
  3. Connect Water Supply: Connect hot water supply line to the water inlet valve. Use only new braided stainless steel hoses.
  4. Connect Drain Hose: Route the drain hose into sink drain or garbage disposal with proper high loop installation.
  5. Electrical Connection: Connect to a properly grounded 120V, 60Hz, 15A dedicated circuit. Do not use an extension cord.
  6. Level the Dishwasher: Adjust the leveling legs to ensure the dishwasher is level from front to back and side to side.
  7. Test Run: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Warning: All installations must be performed by a qualified technician to ensure proper operation and maintain warranty coverage.

Specifications

Model Number WDT750SAHZ0
Type Built-in Dishwasher
Color Stainless Steel / Black
Capacity 14 Place Settings
Noise Level 46 dBA
Control Type Electronic Touch Controls with LED Display
Energy Rating ENERGY STARĀ® Certified
Water Consumption 2.9 gallons per cycle
Power Requirements 120V, 60Hz, 15A
Dimensions (HxWxD) 33.75 x 23.56 x 24.25 inches
Weight 105 lbs
Drying System Heated Dry with Fan Assist

Warranty Information

  • Full Warranty: 1 year parts and labor
  • Motor Warranty: 10 years on Direct Drive Motor
  • Racks & Tub: Limited lifetime warranty
  • Additional Coverage: Optional extended warranty available

For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com

Key Features

Third Level Rack

Extra upper rack provides additional space for utensils, small items and cooking tools, maximizing loading capacity and organization.

Power Clean Cycle

Intensive cleaning cycle with high-pressure jets and extended wash time for heavily soiled pots, pans and bakeware with baked-on food.

Sensor Cycle Technology

Advanced sensors automatically detect soil level and adjust water temperature, cycle time and wash action for optimal cleaning performance.

Steam Clean Option

Steam technology helps to remove tough, baked-on foods while sanitizing dishes, eliminating 99.9% of food soil bacteria.

Quiet Operation

Sound insulation and advanced motor technology provide quiet operation at only 46 dBA, equivalent to normal library conversation levels.

Soil Grinder System

Advanced filtration system with hard food disposer grinds and eliminates food particles, preventing redeposit on clean dishes.

Wash System Technology

Power Scour Spray Arm

High-pressure jets target tough, baked-on foods with concentrated cleaning power

Multi-Level Wash System

Upper, middle and lower spray arms ensure complete coverage and cleaning

Targeted Spray Zones

Precise water direction to hard-to-reach areas and specific dish types

Filtration System

Multi-stage filtration removes food particles and prevents redeposit

Heated Wash

High-temperature water for superior cleaning and sanitization

Fan-Assisted Drying

Combination of heated dry and fan circulation for complete drying

Troubleshooting

Problem Possible Cause Solution
Dishwasher won't start Power issue, door not closed properly, control lock activated Check power supply, ensure door is latched completely, check control lock
Poor cleaning results Overloading, wrong detergent, incorrect loading, clogged spray arms Properly load dishes, use correct detergent, clean spray arms
Water not draining Drain hose clogged, drain pump issue, air gap blockage Check drain hose for obstructions, clean drain pump, check air gap
Leaking water Door not sealed, overfilling, loose connections, worn gasket Check door seal, ensure proper loading, check connections, replace gasket
Unusual noises Foreign objects in pump, worn wash arm bearings, loose spray arms Check for foreign objects, inspect wash arm bearings, tighten spray arms
Dishes not drying Heating element failure, rinse aid empty, improper loading Check heating element, refill rinse aid, ensure proper loading for drainage

Error Codes

  • F1E1: Water supply issue - Check water supply and inlet valve
  • F2E1: Drain issue - Check drain hose and pump
  • F3E1: Overflow detected - Check for leaks and water level sensor
  • F4E1: Heating element issue - Check heating element and thermostat
  • F5E1: Motor control issue - Contact service center
  • F6E1: Temperature sensor failure - Check temperature sensors
  • F7E1: Control board communication error - Reset or replace control board

Manual Downloads

Current Model Manuals

WDT750SAHZ0

Built-in Dishwasher with Third Rack

WDT730PAHZ0

Built-in Dishwasher with Steam

WDT710PAHZ0

Built-in Dishwasher Basic Model

WDT970SAHZ0

Top Control Dishwasher

Popular Previous Models

WDF760SADM0

Built-in Dishwasher with Third Rack

WDT720PADM0

Built-in Dishwasher with Power Clean

WDF540PADM0

Built-in Dishwasher Standard Model

WDT910SADM0

Built-in Dishwasher with Sensor Cycle

Note: For models not listed here, please visit the Whirlpool Support Website for complete documentation.