Installation Guide
Tools Needed:
- Adjustable spanner
- Spirit level
- Screwdrivers (flat and Phillips)
- Pipe wrench
- Tape measure
- Water pressure gauge
Step-by-Step Installation
- Choose Installation Location: Select a location near kitchen plumbing and electrical connections on a solid, level floor with adequate ventilation.
- Remove Packaging: Remove all shipping materials and protective films from the dishwasher.
- Connect Water Supply: Connect hot water supply line to the water inlet valve. Use Australian standard hoses and ensure water pressure is between 0.03-1 MPa.
- Connect Drain Hose: Route the drain hose into the sink waste or dedicated drain pipe with proper air gap to prevent backflow.
- Electrical Connection: Connect to a properly grounded 230-240V, 50Hz, AC outlet with dedicated circuit. Must be installed by licensed electrician in Australia.
- Level the Dishwasher: Adjust the leveling feet to ensure the dishwasher is perfectly level from front to back and side to side.
- Test Run: Run the dishwasher through a complete cycle to check for leaks and proper operation before final installation.
Specifications
| Model Series | ADG 756/IX |
| Type | Built-in Dishwasher |
| Colour | Stainless Steel |
| Place Settings | 14 Place Settings |
| Noise Level | 44 dB |
| Control Type | Electronic Touch Controls with LCD Display |
| Energy Rating | 4 Star (Australian Standards) |
| Water Consumption | 11.5 L per cycle (Standard) |
| Power Requirements | 230-240V, 50Hz, 10A |
| Dimensions (HxWxD) | 820 x 598 x 550 mm |
| Weight | 42 kg |
| Drying System | Heat Exchange Drying |
Warranty Information
- Full Warranty: 2 years parts and labour Australia wide
- Motor Warranty: 5 years on wash motor
- Additional Coverage: Optional extended warranty available
For warranty service in Australia, contact Whirlpool Customer Service at 1300 363 466 or visit Whirlpool.com.au
Key Features
6th Sense Technology
Whirlpool's intelligent 6th Sense technology automatically adjusts water temperature, cycle time and detergent usage based on soil level for optimal cleaning results.
AutoSense Cycle
Automatically detects how dirty your dishes are and adjusts the cycle accordingly, saving time, water and energy while ensuring perfect cleaning every time.
Zone Wash
Target specific areas of the dishwasher for intensive cleaning, perfect for heavily soiled pots and pans in one section while gently washing delicate items in another.
Sanitize Option
Raises water temperature to 70°C during final rinse to eliminate 99.9% of bacteria, perfect for baby bottles and kitchen utensils.
Quiet Operation
Advanced insulation and sound-dampening technology ensures quiet operation at just 44 dB, making it ideal for open-plan Australian kitchens.
Half Load Option
Save water and energy when washing smaller loads, perfect for Australian households and conserving resources.
Wash Programs Explained
AutoSense
Intelligent program that adapts to soil level for optimal cleaning
Heavy
Intensive cleaning for pots, pans and heavily soiled dishes
Normal
Daily wash program for regular soiled dishes and utensils
Quick
Fast 30-minute cycle for lightly soiled items
Eco
Energy and water saving program for environmentally conscious washing
Rinse & Hold
Rinses dishes to prevent drying of food residues before full wash
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dishwasher won't start | Power issue, door not closed properly, child lock activated | Check power supply, ensure door is latched completely, check child lock setting |
| Poor cleaning results | Overloading, wrong detergent, incorrect program selection | Load dishes properly, use recommended detergent, select AutoSense program |
| Water not draining | Drain hose clogged or kinked, filter blocked | Check drain hose for obstructions, clean filter system |
| Leaking water | Door not sealed, overfilling, loose connections | Check door seal, ensure proper loading, check water connections |
| Unusual noises | Foreign objects in spray arms, improper loading | Check spray arms for obstructions, reload dishes properly |
| Error codes displayed | Various system faults detected | Refer to error code section below, contact service if persistent |
Error Codes
- F1: Water supply issue - Check water supply and inlet valve
- F2: Drain issue - Check drain hose and pump
- F3: Heating issue - Check heating element and thermostat
- F4: Temperature sensor fault - Contact service center
- F5: Water level sensor fault - Check for blockages
- F6: Motor control fault - Contact authorised service technician
Manual Downloads
Current Australian Models
ADG 756/IX
14 Place 6th Sense Dishwasher
ADG 854/IX
15 Place 6th Sense Pro
WFO 3T123/IX
Freestanding 6th Sense
ADG 952/BS
Black Stainless 6th Sense
Popular Previous Australian Models
ADG 554/IX
13 Place 6th Sense
WFO 3T223/IX
Freestanding 14 Place
ADG 752/IX
14 Place Stainless Steel
WDF 520P/IX
12 Place Built-in