Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
- Pipe thread seal tape
Step-by-Step Installation
- Choose Installation Location: Select a location near water supply, drain, and electrical connections on a solid, level floor.
- Remove Shipping Materials: Remove all shipping bolts and packaging materials from the dishwasher.
- Connect Water Supply: Connect hot water supply line to the water inlet valve. Use only new hoses and apply thread seal tape.
- Connect Drain Hose: Route the drain hose into sink drain or garbage disposal with a high loop to prevent backflow.
- Electrical Connection: Connect to a properly grounded 120V, 60Hz, AC only outlet. Hardwiring may be required for some models.
- Level the Dishwasher: Adjust the leveling legs to ensure the dishwasher is level from front to back and side to side.
- Test Run: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Specifications
| Model Series | WDT series / WDF series |
| Type | Built-in Dishwasher |
| Color | Stainless Steel / White / Black |
| Place Settings | 14-16 place settings |
| Noise Level | 44-48 dB |
| Control Type | Electronic Controls with Display |
| Energy Rating | Energy Star Certified |
| Water Consumption | 2.5-3.5 gallons per cycle |
| Power Requirements | 120V, 60Hz, 15A |
| Dimensions (HxWxD) | 33.75 x 23.56 x 24.56 inches |
| Weight | 95-115 lbs |
| Wash Cycles | 6-8 cycles including Auto, Heavy, Normal, Light, Rinse |
Warranty Information
- Full Warranty: 1 year parts and labor
- Extended Warranty: 5-10 years on racks and tub
- Additional Coverage: Optional extended warranty available
For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com
Key Features
6th Sense Technology
Advanced sensors automatically adjust water temperature, cycle time, and energy usage based on soil level and load size for optimal cleaning performance.
Soil Sensor
Detects the level of soil in the wash water and adjusts the cycle accordingly, ensuring thorough cleaning while saving water and energy.
Zone Booster
Concentrated cleaning power in specific zones for heavily soiled pots, pans, and dishes that need extra attention.
Third Level Rack
Additional top rack provides extra space for cutlery, utensils, and small items, maximizing loading capacity.
Hard Food Disposer
Built-in food disposer grinds up food particles, eliminating the need for pre-rinsing dishes before loading.
Sanitize Cycle
High-temperature wash and rinse cycles eliminate 99.9% of household bacteria for hygienically clean dishes.
Wash Cycle Options
Auto Wash
Automatically detects soil level and adjusts cycle time and temperature
Heavy Wash
Intensive cleaning for pots, pans, and heavily soiled dishes
Normal Wash
Standard cleaning for everyday dishes with normal soil
Light Wash
Quick cycle for lightly soiled dishes and glassware
Rinse Only
Rinses dishes to prevent drying of food particles until full load is ready
Delay Start
Delays cycle start for up to 24 hours to run during off-peak hours
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dishwasher won't start | Power issue, door not closed properly, child lock activated | Check power supply, ensure door is latched completely, check child lock setting |
| Poor cleaning results | Overloading, wrong detergent, clogged spray arms, low water temperature | Rearrange load properly, use recommended detergent, clean spray arms, check water heater |
| Water not draining | Drain hose clogged or kinked, drain filter blocked | Check drain hose for obstructions, clean drain filter |
| Leaking water | Door not sealed, overfilling, loose connections, worn door gasket | Check door seal, ensure proper loading, check connections, inspect door gasket |
| Unusual noises | Foreign objects in pump, spray arm hitting dishes, worn wash motor | Check for foreign objects, rearrange load, contact service if motor noise persists |
| Dishes not drying | Rinse aid empty, water temperature too low, plastic items not drying properly | Refill rinse aid, check water heater temperature, use heated dry option |
Error Codes
- F1: Water supply issue - Check water supply and inlet valve
- F2: Drain issue - Check drain hose and pump
- F3: Temperature sensor issue - Contact service center
- F4: Heater issue - Contact service center
- F5: Motor issue - Contact service center
- F6: Control board communication error - Reset dishwasher
- F7: Water temperature too low - Check water heater
- F8: Overflow detected - Check for leaks and water level
Manual Downloads
Current Model Manuals
WDT970SAHZ
6th Sense Top Control with Hard Food Disposer
WDF560SAHW
6th Sense Front Control with Third Rack
WDT730PAHZ
6th Sense with PrintShield Finish
WDF540PADM
6th Sense with Stainless Steel Interior
Popular Previous Models
WDT720PADM
6th Sense with Clean Water Wash System
WDF750SAHM
6th Sense with Advanced Dry Option
WDT910SAYM
6th Sense with Crystal Dry Technology
WDF560SAYM
6th Sense with Fingerprint Resistant Finish