Whirlpool 6th Sense PowerClean Dishwasher

User Manual & Installation Guide

PowerClean Technology

Installation Guide

Tools Needed:

  • Adjustable wrench
  • Level
  • Screwdrivers (flat and Phillips)
  • Pipe wrench
  • Tape measure

Step-by-Step Installation

  1. Choose Installation Location: Select a location near water supply, drain, and electrical connections on a solid, level floor.
  2. Remove Shipping Materials: Remove all shipping bolts and packaging materials from the dishwasher.
  3. Connect Water Supply: Connect hot water supply line to the water inlet valve. Use only new hoses and ensure proper sealing.
  4. Connect Drain Hose: Route the drain hose into the sink drain or garbage disposal with a high loop to prevent backflow.
  5. Electrical Connection: Connect to a properly grounded 120V, 60Hz, AC only outlet. Ensure dedicated circuit if required.
  6. Level the Dishwasher: Adjust the leveling legs to ensure the dishwasher is level from front to back and side to side.
  7. Test Run: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Warning: All installations must be performed by a qualified installer to ensure proper operation and maintain warranty coverage.

Specifications

Model Series WDT系列 / WDF系列
Type Built-in Dishwasher
Color Stainless Steel / White
Place Settings 14 Place Settings
Noise Level 46 dB
Control Type Electronic Controls with LED Display
Energy Rating A++ (Energy Efficient)
Water Consumption 9.5 Liters per cycle
Power Requirements 120V, 60Hz, 15A
Dimensions (HxWxD) 82 x 60 x 57 cm
Weight 45 kg
Drying System Heat Dry with Fan Assist

Warranty Information

  • Full Warranty: 2 years parts and labor
  • Motor Warranty: 10 years on motor
  • Racks Warranty: Lifetime on stainless steel tub and racks

For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com

Key Features

6th Sense Technology

Advanced sensors automatically adjust water temperature, cycle time, and energy usage based on the soil level of dishes for optimal cleaning performance.

PowerClean System

High-pressure spray jets and optimized water distribution ensure thorough cleaning of heavily soiled pots, pans, and dishes with stubborn food residue.

Zone Boost

Targeted cleaning power for specific areas of the dishwasher, providing extra cleaning intensity where it's needed most for challenging loads.

Sanitize Cycle

High-temperature wash and rinse cycles eliminate 99.9% of food soil bacteria, providing hygienically clean dishes for your family.

Third Rack

Extra rack designed for utensils, spatulas, and small kitchen tools, maximizing loading capacity and organization efficiency.

Quiet Operation

Sound insulation and advanced motor technology ensure quiet operation at just 46 dB, allowing use during family time without disturbance.

Cleaning Programs

Auto Wash

Automatically detects soil level and adjusts cycle for optimal cleaning and energy efficiency

Heavy Wash

Intensive cleaning for pots, pans, and heavily soiled dishes with extended wash time

Normal Wash

Standard cleaning cycle for everyday dishes with normal soil levels

Quick Wash

Fast 30-minute cycle for lightly soiled dishes when you're in a hurry

Rinse Only

Quick rinse to prevent food from drying on dishes before running full cycle

Eco Wash

Energy-saving cycle that uses less water and electricity while maintaining cleaning performance

Troubleshooting

Problem Possible Cause Solution
Dishwasher won't start Power issue, door not closed properly Check power supply, ensure door is latched completely
Poor cleaning results Overloading, wrong detergent, spray arms blocked Reduce load size, use correct detergent, clean spray arms
Water not draining Drain hose clogged, filter blocked Check drain hose for obstructions, clean filter system
Leaking water Door not sealed, overfilling, loose connections Check door seal, ensure proper detergent amount, check connections
Unusual noises Foreign objects in pump, spray arms hitting dishes Check for foreign objects, rearrange load properly
Dishes not drying Rinse aid empty, heating element issue Refill rinse aid, check heating element function

Error Codes

  • F1: Water supply issue - Check water supply and inlet valve
  • F2: Drain issue - Check drain hose and pump
  • F3: Temperature sensor error - Contact service center
  • F4: Heating element issue - Contact service center
  • F5: Door lock mechanism error - Ensure door closes properly
  • F6: Motor control board error - Contact service center

Manual Downloads

Current Model Manuals

WDT970SAHZ

6th Sense PowerClean with Third Rack

WDF560SAHZ

6th Sense PowerClean 24"

WDT750SAHZ

PowerClean with Zone Boost

WDF540PADM

PowerClean in Black Stainless

Popular Previous Models

WDT720PADM

PowerClean with Third Rack

WDF760SADM

6th Sense with PowerClean

WDT710PAHZ

PowerClean Stainless Steel

WDF760SAHZ

6th Sense 24" Built-in

Note: For models not listed here, please visit the Whirlpool Support Website for complete documentation.