Whirlpool 6th Sense PowerClean Dishwasher

User Manual & Troubleshooting Guide

6th Sense PowerClean Technology

Installation Guide

Tools Needed:

  • Adjustable wrench
  • Level
  • Screwdrivers (flat and Phillips)
  • Pliers
  • Tape measure
  • Pipe thread seal tape

Step-by-Step Installation

  1. Choose Installation Location: Select a location near water supply, drain, and electrical connections on a solid, level floor.
  2. Remove Shipping Materials: Remove all shipping bolts and packaging materials from the dishwasher.
  3. Connect Water Supply: Connect hot water supply line to the water inlet valve. Use only new hoses and apply thread seal tape.
  4. Connect Drain Hose: Route the drain hose into the sink drain or garbage disposal with a high loop to prevent backflow.
  5. Electrical Connection: Connect to a properly grounded 120V, 60Hz, AC only outlet. Do not use an extension cord.
  6. Level the Dishwasher: Adjust the leveling legs to ensure the dishwasher is level from front to back and side to side.
  7. Test Run: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Warning: All installations must be performed by a qualified installer to ensure proper operation and maintain warranty coverage.

Specifications

Model Series WDT系列 / WDF系列
Type Built-in Dishwasher
Color Stainless Steel / White
Place Settings 14-16 place settings
Noise Level 44-48 dB
Control Type Electronic Controls with Display
Energy Rating A++ (Energy Efficient)
Water Consumption 9-12 L/cycle
Power Requirements 120V, 60Hz, 15A
Dimensions (HxWxD) 82-85 x 60 x 60 cm
Weight 45-50 kg
Drying System Heat Exchange / Condensation Drying

Warranty Information

  • Full Warranty: 2 years parts and labor
  • Motor Warranty: 10 years on motor
  • Additional Coverage: Optional extended warranty available

For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com

Key Features

6th Sense Technology

Advanced sensors automatically adjust water temperature, cycle time, and energy usage based on the soil level of dishes for optimal cleaning performance.

PowerClean System

High-pressure spray jets and optimized water distribution ensure thorough cleaning of heavily soiled pots, pans, and dishes.

Soil Sensor

Automatically detects how dirty the dishes are and adjusts the cycle accordingly, saving water and energy when possible.

Zone Booster

Concentrated cleaning power in specific zones for heavily soiled items, while being gentle on delicate dishes in other areas.

Quiet Operation

Advanced insulation and sound-dampening materials provide quiet operation as low as 44 dB.

Third Rack

Additional top rack provides extra space for cutlery, utensils, and small items, maximizing loading capacity.

Cleaning Programs

Auto Wash

Automatically adjusts cycle based on soil sensor readings for optimal cleaning

Heavy Wash

Intensive cleaning for pots, pans, and heavily soiled dishes

Normal Wash

Standard cleaning for everyday dishes with normal soiling

Quick Wash

Fast cycle for lightly soiled dishes in just 30 minutes

Eco Wash

Energy-efficient cycle with reduced water and energy consumption

Rinse Only

Quick rinse to prevent food from drying on dishes before full wash

Troubleshooting

Problem Possible Cause Solution
Dishwasher won't start Power issue, door not closed properly, child lock activated Check power supply, ensure door is latched completely, check child lock setting
Poor cleaning results Overloading, wrong detergent, incorrect loading, clogged spray arms Reduce load size, use correct detergent, load properly, clean spray arms
Water not draining Drain hose clogged or kinked, filter blocked Check drain hose for obstructions or kinks, clean filter system
Leaking water Door not sealed, overfilling, loose connections, worn door gasket Check door seal, ensure proper detergent amount, check connections, inspect gasket
Unusual noises Foreign objects in pump, spray arm hitting dishes, worn pump motor Check for foreign objects, rearrange dishes, contact service if pump issue
Dishes not drying Rinse aid empty, heating element issue, wrong cycle selected Refill rinse aid, check heating element, select cycle with drying option

Error Codes

  • F1: Water supply issue - Check water supply and inlet valve
  • F2: Drain issue - Check drain hose and pump
  • F3: Temperature sensor issue - Contact service center
  • F4: Heating element issue - Contact service center
  • F5: Motor issue - Contact service center
  • F6: Control board communication error - Reset dishwasher
  • F7: Water leak detected - Check for leaks and water supply
  • F8: Door switch issue - Ensure door is fully closed

Manual Downloads

Current Model Manuals

WDT970SAHZ

6th Sense PowerClean with Third Rack

WDF540PADM

6th Sense PowerClean 24" Built-in

WDT730PAHZ

6th Sense PowerClean Stainless Steel

WDF518PADM

6th Sense PowerClean White

Popular Previous Models

WDT720PADM

6th Sense Stainless Steel

WDF760PADM

6th Sense with PowerClean

WDT750SAHZ

6th Sense Third Rack Model

WDF560PADM

6th Sense 24" Built-in

Note: For models not listed here, please visit the Whirlpool Support Website for complete documentation.