Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pipe wrench
- Tape measure
- Bucket
Step-by-Step Installation
- Choose Installation Location: Select a location near water supply, drain, and electrical connections on a solid, level floor under countertop.
- Remove Shipping Materials: Remove all shipping bolts, brackets and packaging materials from the dishwasher interior and exterior.
- Connect Water Supply: Connect hot water supply line to the water inlet valve. Use only new braided stainless steel hoses.
- Connect Drain Hose: Route the drain hose into sink drain or garbage disposal with high loop to prevent backflow.
- Electrical Connection: Connect to a properly grounded 120V, 60Hz, dedicated circuit. Follow local electrical codes.
- Level the Dishwasher: Adjust the leveling legs to ensure the dishwasher is level from front to back and side to side.
- Test Run: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Specifications
| Model Series | WDT系列 / WDF系列 |
| Type | Built-in Dishwasher |
| Color | Stainless Steel / White |
| Place Settings | 14-16 place settings |
| Noise Level | 44-48 dB |
| Control Type | Electronic Controls with LED Display |
| Energy Rating | Energy Star Certified |
| Water Consumption | 2.5-4.5 gallons per cycle |
| Power Requirements | 120V, 60Hz, 15A |
| Dimensions (HxWxD) | 34.5 x 24 x 24 inches |
| Weight | 75-85 lbs |
| Drying System | 6th Sense Heat Exchange Drying |
Warranty Information
- Full Warranty: 1 year parts and labor
- Motor Warranty: 5 years on wash motor
- Additional Coverage: Optional extended warranty available
For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com
Key Features
6th Sense Technology
Advanced sensors automatically adjust water temperature, cycle time and energy usage based on soil level and load size for optimal cleaning performance.
Soil Sensor
Intelligent soil sensor detects how dirty dishes are and adjusts cycle parameters accordingly, ensuring thorough cleaning while saving water and energy.
Zone Booster
Concentrated cleaning power in specific zones for heavily soiled pots, pans and baking sheets with targeted spray jets.
Third Level Rack
Additional top rack provides extra space for cutlery, utensils and small items, maximizing loading capacity and organization.
Hard Food Disposer
Built-in food disposer grinds and eliminates food particles, preventing drain clogs and eliminating pre-rinsing.
Sanitize Cycle
NSF certified sanitize cycle uses high-temperature water to eliminate 99.9% of food soil bacteria for hygienically clean dishes.
6th Sense Wash Programs
Auto Wash
Automatically adjusts cycle based on soil sensor readings for optimal cleaning
Heavy Wash
Intensive cleaning for pots, pans and heavily soiled dishes
Normal Wash
Standard cleaning for everyday dishes with normal soil levels
Light Wash
Quick cycle for lightly soiled dishes and glassware
Rinse Only
Quick rinse to prevent food from drying on dishes
Sanitize
High-temperature cycle for hygienic cleaning and bacteria elimination
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dishwasher won't start | Power issue, door not latched properly, child lock engaged | Check power supply, ensure door is latched completely, check child lock setting |
| Poor cleaning results | Overloading, wrong detergent, clogged spray arms, low water temperature | Rearrange load properly, use correct detergent, clean spray arms, check water heater |
| Water not draining | Drain hose clogged, air gap blocked, filter clogged | Check drain hose for obstructions, clean air gap, clean filter assembly |
| Leaking water | Door not sealed, overfilling, loose connections, worn door gasket | Check door seal, ensure proper loading, check connections, inspect door gasket |
| Unusual noises | Foreign objects in pump, spray arm hitting dishes, worn wash motor | Check for foreign objects, rearrange dishes, contact service if motor noise |
| Dishes not drying | Rinse aid empty, water temperature too low, improper loading | Refill rinse aid, check water heater temperature, improve air circulation |
Error Codes
- F1: Water supply issue - Check water supply and inlet valve
- F2: Drain issue - Check drain hose and pump
- F3: Temperature sensor issue - Contact service center
- F4: Water level issue - Check float switch and water inlet
- F5: Heating element issue - Contact service center
- F6/F7: Motor control issue - Contact service center
- F8: Door switch issue - Ensure door is fully closed
Manual Downloads
Current Model Manuals
WDT970SAHZ
6th Sense Top Control
WDF540PADM
6th Sense Front Control
WDT750SAHZ
6th Sense with Third Rack
WDF518PADM
6th Sense Built-in
Popular Previous Models
WDT720PADM
6th Sense Stainless
WDF760PADM
6th Sense Front Control
WDT710PAHZ
6th Sense Black Stainless
WDF760SAHZ
6th Sense Fingerprint