Whirlpool Dishwasher Cleaning Manual

User Manual & Maintenance Guide

Professional Cleaning Series

Installation Guide

Tools Needed:

  • Adjustable wrench
  • Level
  • Screwdrivers (flat and Phillips)
  • Pipe wrench
  • Tape measure
  • Plumber's tape

Step-by-Step Installation

  1. Choose Installation Location: Select a location near kitchen plumbing and electrical connections on a solid, level floor under countertop.
  2. Remove Shipping Materials: Remove all shipping bolts and packaging materials from the dishwasher interior and exterior.
  3. Connect Water Supply: Connect hot water supply line to the water inlet valve. Use only new hoses and apply plumber's tape to threads.
  4. Connect Drain Hose: Route the drain hose into the sink drain or garbage disposal with a high loop to prevent backflow.
  5. Electrical Connection: Connect to a properly grounded 120V, 60Hz, AC only outlet. Ensure dedicated circuit for dishwasher.
  6. Level the Dishwasher: Adjust the leveling legs to ensure the dishwasher is level from front to back and side to side.
  7. Secure to Countertop: Use mounting brackets to secure the dishwasher to the underside of the countertop.
  8. Test Run: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Warning: All installations must be performed by a qualified installer to ensure proper operation and maintain warranty coverage.

Specifications

Model Series WDT970SAHZ
Type Built-in Dishwasher
Color Stainless Steel / Black
Place Settings 16 Place Settings
Noise Level 44 dB
Control Type Touch Controls with LED Display
Energy Rating ENERGY STARĀ® Certified
Water Consumption 2.9 gallons per cycle
Power Requirements 120V, 60Hz, 15A
Dimensions (HxWxD) 34.5 x 23.8 x 24.5 inches
Weight 105 lbs
Drying System Heat Dry with Fan Assist

Warranty Information

  • Full Warranty: 1 year parts and labor
  • Stainless Steel Tub Warranty: 10 years limited
  • Additional Coverage: Optional extended warranty available

For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com

Key Features

Power Clean Plus System

Advanced cleaning system with targeted spray jets that remove tough, baked-on food with powerful water pressure and optimal temperature control.

Third Level Rack

Extra upper rack provides additional space for cutlery, cooking utensils, and small items, maximizing loading capacity and organization.

Sensor Cycle Technology

Intelligent sensors automatically adjust water temperature, cycle time, and energy use based on soil level for optimal cleaning efficiency.

Steam Clean Option

Steam function helps to loosen and remove tough, dried-on foods while sanitizing dishes and reducing the need for pre-rinsing.

Quiet Operation

Sound insulation and advanced motor technology provide quiet operation at only 44 dB, making it ideal for open-concept living spaces.

Soil Sensor

Automatically detects how dirty dishes are and adjusts the cycle accordingly, saving water and energy on lightly soiled loads.

Cleaning Cycles Explained

Normal Wash

Standard cycle for everyday dishes with normal soil levels

Heavy Wash

Intensive cleaning for pots, pans, and heavily soiled items

Quick Wash

Fast cycle for lightly soiled dishes in just 30 minutes

Rinse Only

Rinses dishes without detergent to prevent drying of food particles

Sanitize

High-temperature cycle that eliminates 99.9% of bacteria

Delay Start

Program dishwasher to start at a later time for convenience

Troubleshooting

Problem Possible Cause Solution
Dishwasher won't start Power issue, door not closed properly Check power supply, ensure door is latched completely
Poor cleaning results Overloading, wrong detergent, clogged spray arms Rearrange load properly, use correct detergent, clean spray arms
Water not draining Drain hose clogged, air gap blocked Check drain hose for obstructions, clean air gap
Leaking water Door not sealed, overfilling, loose connections Check door seal, ensure proper detergent amount, check connections
Unusual noises Foreign objects in pump, spray arm hitting dishes Check for foreign objects, rearrange dishes properly
Dishes not drying Rinse aid empty, heat dry option off Refill rinse aid, ensure heat dry is enabled

Error Codes

  • F1: Water supply issue - Check water supply and inlet valve
  • F2: Drain issue - Check drain hose and pump
  • F3: Temperature sensor issue - Contact service center
  • F4: Overflow detected - Check for leaks and water level
  • F5: Door not closed properly - Ensure door is fully closed
  • F6: Motor issue - Contact service center

Manual Downloads

Current Model Manuals

WDT970SAHZ

Top Control Dishwasher with Third Rack

WDF560SAHZ

Front Control Dishwasher with Steam

WDP370SAHZ

Energy Efficient Dishwasher

WDT730SAHZ

Quiet Series Dishwasher

Popular Previous Models

WDF760SADM

Stainless Steel Dishwasher

WDT720PADM

Black Stainless Dishwasher

WDF540PADM

White Dishwasher with Third Rack

WDT910SADM

Premium Dishwasher with Controls

Note: For models not listed here, please visit the Whirlpool Support Website for complete documentation.