Whirlpool Dishwasher Manual PDF Australia

User Manual & Installation Guide

Australian Models

Installation Guide

Tools Needed:

  • Adjustable wrench
  • Level
  • Screwdrivers (flat and Phillips)
  • Pliers
  • Tape measure
  • Pipe thread seal tape

Step-by-Step Installation

  1. Choose Installation Location: Select a location near necessary plumbing and electrical connections on a solid, level floor with adequate clearance.
  2. Remove Shipping Materials: Remove all shipping bolts, brackets and packaging materials from the dishwasher.
  3. Connect Water Supply: Connect hot water supply line to the water inlet valve. Use only new hoses and apply thread seal tape.
  4. Connect Drain Hose: Route the drain hose into the sink waste pipe or dedicated drain connection with proper high loop installation.
  5. Electrical Connection: Connect to a properly grounded 230V, 50Hz, AC only outlet. Australian models require dedicated circuit.
  6. Level the Dishwasher: Adjust the leveling legs to ensure the dishwasher is level from front to back and side to side.
  7. Test Run: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Warning: All installations must be performed by a qualified installer to ensure proper operation and maintain warranty coverage. Australian electrical standards must be followed.

Specifications

Model Series WDF5A14X AU / WDF5A16X AU
Type Built-in Dishwasher
Color Stainless Steel / White
Place Settings 14-16 settings
Noise Level 46-49 dB
Control Type Electronic Controls with LED Display
Energy Rating 4-5 Star (Australian Standards)
Water Consumption 11-13 L/cycle
Power Requirements 230-240V, 50Hz, 10A
Dimensions (HxWxD) 82-85 x 60 x 60 cm
Weight 45-50 kg
Drying System Heat Exchange / Condensation Drying

Warranty Information

  • Full Warranty: 2 years parts and labor
  • Motor Warranty: 5 years on wash motor
  • Additional Coverage: Optional extended warranty available

For warranty service, contact Whirlpool Australia Customer Service at 1300 363 466 or visit Whirlpool.com.au

Key Features

6th Sense Technology

Whirlpool's intelligent 6th Sense technology automatically adjusts water, energy and time based on the load's soil level for optimal cleaning performance.

Zone Wash

Allows you to concentrate washing power on specific areas of the dishwasher, perfect for heavily soiled pots and pans in the lower rack.

Quiet Operation

Advanced sound insulation and motor technology ensures quiet operation as low as 46 dB, making it ideal for open-plan Australian homes.

Auto Release Dry

Automatically releases door at the end of cycle to improve drying performance and prevent moisture buildup.

Soil Sensor

Automatically detects how dirty your dishes are and adjusts the cycle accordingly to save water and energy.

Australian Water Efficiency

Specifically designed for Australian water conditions with WELS 4-5 star rating for maximum water efficiency.

Wash Programs Explained

Auto Wash

Automatically adjusts cycle based on soil level detection

Heavy Wash

Intensive cleaning for pots, pans and heavily soiled items

Normal Wash

Standard daily cycle for regular dishwashing needs

Quick Wash

Fast 30-minute cycle for lightly soiled dishes

Eco Wash

Energy and water efficient cycle for environmental savings

Rinse Only

Quick rinse to prevent food drying on dishes before full wash

Troubleshooting

Problem Possible Cause Solution
Dishwasher won't start Power issue, door not closed properly Check power supply, ensure door is latched completely
Poor cleaning results Overloading, wrong detergent, incorrect program Reduce load size, use correct detergent, select appropriate program
Water not draining Drain hose clogged or kinked Check drain hose for obstructions or kinks, clean filter
Leaking water Door not sealed, overfilling, loose connections Check door seal, ensure proper detergent amount, check connections
Unusual noises Foreign objects in spray arms, unbalanced load Check for foreign objects, ensure proper loading
Dishes not drying Rinse aid empty, incorrect program selection Refill rinse aid, select program with drying option

Error Codes

  • F1: Water supply issue - Check water supply and inlet valve
  • F2: Drain issue - Check drain hose and pump
  • F3: Temperature sensor issue - Contact service center
  • F4: Water leak detected - Check for leaks and water supply
  • F5: Motor issue - Contact service center
  • F6: Control board issue - Contact service center

Manual Downloads

Current Australian Models

WDF5A14X AU

14 Place Settings Dishwasher

WDF5A16X AU

16 Place Settings Dishwasher

WDF5A12X AU

12 Place Settings Dishwasher

WDF5A18X AU

18 Place Settings Dishwasher

Popular Previous Models

ADG 754 AU

14 Place Freestanding

ADP 752 AU

12 Place Built-in

WFC 3C26 AU

Classic Series Dishwasher

WIO 3O33 AU

Integrated Handle Model

Note: For models not listed here, please visit the Whirlpool Australia Support Website for complete documentation.