Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
Step-by-Step Installation
- Choose Installation Location: Select a location near necessary plumbing and electrical connections on a solid, level floor.
- Remove Shipping Materials: Remove all shipping bolts and packaging materials from the dishwasher.
- Connect Water Supply: Connect hot water supply line to the water inlet valve. Use only new hoses.
- Connect Drain Hose: Route the drain hose into a standpipe or garbage disposal with a high loop to prevent backflow.
- Electrical Connection: Connect to a properly grounded 120V, 60Hz, AC only outlet. Do not use an extension cord.
- Level the Dishwasher: Adjust the leveling legs to ensure the dishwasher is level from front to back and side to side.
- Test Run: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Specifications
| Model Series | WDT730PAHZ |
| Type | Built-in Dishwasher |
| Color | Stainless Steel / Black |
| Capacity | 14 Place Settings |
| Noise Level | 46 dB |
| Control Type | Touch Controls with LED Display |
| Energy Rating | ENERGY STAR® Certified |
| Water Consumption | 2.9 gallons per cycle |
| Power Requirements | 120V, 60Hz, 15A |
| Dimensions (HxWxD) | 34.5 x 23.8 x 24.5 inches |
| Weight | 75 lbs |
| Cycle Time | 60-150 minutes |
Warranty Information
- Full Warranty: 1 year parts and labor
- Motor Warranty: 10 years on Direct Drive Motor
- Additional Coverage: Optional extended warranty available
For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com
Key Features
Control Panel Symbols
Understanding the symbols on your Whirlpool dishwasher control panel is essential for proper operation and optimal cleaning results.
Cycle Symbols
Different cycle symbols represent various washing programs including Normal, Heavy, Light, Rinse Only, and Sanitize cycles.
Option Symbols
Option symbols include Heat Dry, Air Dry, Delay Start, High Temp Wash, and Sani Rinse for customized cleaning performance.
Status Indicator Symbols
LED indicators show cycle progress, clean status, and alert you to any issues requiring attention during operation.
Third Rack Symbol
Special symbol indicates proper loading of the third rack for utensils and small items to ensure optimal water coverage.
Soil Level Symbols
Symbols help you select the appropriate soil level setting from Light to Heavy for the best cleaning results based on load condition.
Common Control Panel Symbols Explained
Normal Wash
Standard cleaning cycle for everyday dishes with normal soil levels
Heavy Wash
Intensive cleaning for pots, pans, and heavily soiled dishes
Light Wash
Gentle cycle for lightly soiled dishes and delicate items
Rinse Only
Quick rinse cycle to prevent drying of food particles on dishes
Sanitize
High-temperature cycle that eliminates 99.9% of bacteria
Delay Start
Allows programming the dishwasher to start at a later time
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dishwasher won't start | Power issue, door not closed properly | Check power supply, ensure door is latched completely |
| Poor cleaning results | Overloading, wrong detergent, incorrect cycle | Reduce load size, use correct detergent, select appropriate cycle |
| Water not draining | Drain hose clogged or kinked | Check drain hose for obstructions or kinks, clean filter |
| Leaking water | Door not sealed, overfilling, loose connections | Check door seal, ensure proper detergent amount, check connections |
| Unusual noises | Foreign objects in spray arms, unbalanced load | Check for foreign objects, redistribute load evenly |
| Error codes displayed | Various system malfunctions | Refer to error code chart in manual, reset dishwasher |
Error Codes
- F1: Water supply issue - Check water supply and inlet valve
- F2: Drain issue - Check drain hose and pump
- F3: Temperature sensor issue - Contact service center
- F4: Heating element issue - Contact service center
- F5: Motor control issue - Contact service center
- F6: User interface issue - Reset control panel
Manual Downloads
Current Model Manuals
WDT730PAHZ
Built-in Dishwasher with Symbols
WDT750SAHZ
Smart Dishwasher with Symbols
WDF560SAHZ
Front Control Dishwasher
WDT970SAHZ
Premium Dishwasher with Symbols
Popular Previous Models
WDT720PADM
Built-in Dishwasher
WDF540PADM
Front Control Dishwasher
WDT910SSYM
Stainless Steel Dishwasher
WDF750SAYM
Smart Enabled Dishwasher