whirlpool dishwasher manual wdt750sakz2

User Manual & Installation Guide

Built-in Dishwasher

Installation Guide

Tools Needed:

  • Adjustable wrench
  • Level
  • Screwdrivers (flat and Phillips)
  • Pliers
  • Tape measure
  • Drill with bits

Step-by-Step Installation

  1. Prepare Installation Area: Ensure cabinet opening meets required dimensions and has proper electrical and plumbing connections.
  2. Remove Packaging Materials: Remove all shipping materials, protective films, and transit bolts from the dishwasher.
  3. Connect Water Supply: Connect hot water supply line to the water inlet valve using new braided stainless steel hose.
  4. Connect Drain Hose: Route the drain hose to drain connection with high loop to prevent backflow into dishwasher.
  5. Electrical Connection: Connect to a properly grounded 120V, 60Hz, 15A dedicated circuit. Follow local electrical codes.
  6. Level the Dishwasher: Adjust leveling legs to ensure dishwasher is level from front to back and side to side.
  7. Secure to Countertop: Use mounting brackets to secure dishwasher to underside of countertop.
  8. Test Run: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Warning: All installations must be performed by a qualified installer to ensure proper operation and maintain warranty coverage.

Specifications

Model Number WDT750SAKZ2
Type Built-in Dishwasher
Color Stainless Steel / Black
Place Settings 14 Place Settings
Noise Level 46 dBA
Control Type Touch Controls with LED Display
Energy Rating ENERGY STARĀ® Certified
Water Consumption 2.9 gallons per cycle
Power Requirements 120V, 60Hz, 15A
Dimensions (HxWxD) 34.5 x 23.8 x 24.5 inches
Weight 105 lbs
Wash Cycles 5 Wash Cycles + Options

Warranty Information

  • Full Warranty: 1 year parts and labor
  • Extended Warranty: 10 years on stainless steel tub
  • Additional Coverage: Optional extended warranty available

For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com

Key Features

Third Level Rack

Extra upper rack provides additional space for utensils, small items, and cooking tools, maximizing loading capacity and flexibility.

Sensor Cycle

Automatically senses soil level and adjusts water temperature, cycle time, and wash action for optimal cleaning with energy efficiency.

Power ScourĀ® Zone

Concentrated cleaning zone with targeted spray jets for heavily soiled pots, pans, and baking dishes with baked-on food.

Soil Sensor

Advanced sensor technology detects food soil particles in the wash water and automatically adjusts cycle for perfect cleaning results.

Quiet Operation

Sound insulation and advanced motor technology provide quiet operation at only 46 dBA, perfect for open-concept living spaces.

Hard Food Disposer

Built-in food disposer grinds up food particles during the wash cycle, eliminating the need for pre-rinsing dishes.

Wash Cycles Explained

Sensor Wash

Automatically adjusts cycle based on soil level detection for optimal cleaning

Heavy Wash

Intensive cleaning for pots, pans, and heavily soiled dishes with baked-on food

Normal Wash

Standard cleaning cycle for everyday dishes with normal food soil

Light Wash

Quick cycle for lightly soiled dishes, glasses, and breakfast items

Rinse Only

Rinses dishes without detergent to prevent dried-on food until full load

China/Crystal

Gentle cycle for delicate items, fine china, and crystal with lower water temperature

Troubleshooting

Problem Possible Cause Solution
Dishwasher won't start Power issue, door not closed properly, child lock engaged Check power supply, ensure door is latched completely, check child lock
Poor cleaning results Overloading, wrong detergent, incorrect loading Reduce load size, use correct detergent, ensure proper loading
Water not draining Drain hose clogged or kinked, filter blocked Check drain hose for obstructions, clean filter system
Leaking water Door not sealed, overfilling, loose connections Check door seal, ensure proper detergent amount, check connections
Unusual noises Foreign objects in spray arms, improper loading Check for foreign objects, ensure dishes not blocking spray arms
Dishes not drying Heated dry option off, rinse aid empty, plastic items Enable heated dry, refill rinse aid, plastic items may need towel drying

Error Codes

  • F1: Water supply issue - Check water supply and inlet valve
  • F2: Drain issue - Check drain hose and pump
  • F3: Temperature sensor issue - Contact service center
  • F4: Overflow detected - Check for leaks and water level
  • F5: Motor issue - Contact service center
  • F6: Heater issue - Contact service center

Manual Downloads

Current Model Manuals

WDT750SAKZ2

Built-in Dishwasher with Third Rack

WDT750SAHZ2

Built-in Dishwasher with Hard Food Disposer

WDT970SAKZ2

Top Control Built-in Dishwasher

WDF750SAKZ2

Front Control Built-in Dishwasher

Popular Previous Models

WDT720PADM2

Built-in Dishwasher with Power Clean

WDF760PADM2

Front Control Dishwasher with Sensor Cycle

WDT730PADM2

Built-in Dishwasher with Third Rack

WDF540PADM2

Front Control Dishwasher with Hard Food Disposer

Note: For models not listed here, please visit the Whirlpool Support Website for complete documentation.