Whirlpool Dishwasher WDTA50SAKZ

User Manual & Installation Guide

Built-In Dishwasher

Installation Guide

Tools Needed:

  • Adjustable wrench
  • Level
  • Screwdrivers (flat and Phillips)
  • Pliers
  • Tape measure
  • Drill with bits

Step-by-Step Installation

  1. Prepare Installation Area: Ensure cabinet opening is clean and level. Verify electrical and plumbing connections are accessible.
  2. Remove Shipping Materials: Remove all protective films, tapes, and shipping braces from the dishwasher interior.
  3. Connect Water Supply: Connect hot water supply line to the water inlet valve. Use only new braided stainless steel supply line.
  4. Connect Drain Hose: Route drain hose to drain connection with high loop to prevent backflow into dishwasher.
  5. Electrical Connection: Connect to dedicated 120V, 60Hz, 15A circuit. Follow local electrical codes for proper grounding.
  6. Position and Secure: Slide dishwasher into opening and level using adjustable feet. Secure to countertop or adjacent cabinets.
  7. Test Run: Run dishwasher through a complete cycle to check for leaks and proper operation.
Warning: All installations must be performed by a qualified installer to ensure proper operation and maintain warranty coverage.

Specifications

Model Number WDTA50SAKZ
Type Built-In Dishwasher
Color/Finish Stainless Steel / Black
Place Settings 14 Place Settings
Noise Level 49 dBA
Control Type Electronic Touch Controls
Energy Rating ENERGY STARĀ® Certified
Water Consumption 2.9 gallons per cycle
Power Requirements 120V, 60Hz, 15A
Dimensions (HxWxD) 34.5 x 23.75 x 24.5 inches
Weight 95 lbs
Drying System Heated Dry with Fan Assist

Warranty Information

  • Full Warranty: 1 year parts and labor
  • Extended Warranty: 10 years on stainless steel tub
  • Additional Coverage: Optional extended service plans available

For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com

Key Features

Third Level Rack

Extra upper rack provides additional space for cutlery, utensils, and small items, maximizing loading capacity and flexibility.

Sensor Cycle

Automatically detects soil level and adjusts water temperature, cycle time, and wash action for optimal cleaning and energy efficiency.

Power Scour+

Intensive cleaning cycle that combines high-temperature wash with powerful jets to remove baked-on and dried-on foods.

Quiet Partner Sound Insulation

Advanced sound insulation system reduces operating noise to just 49 dBA for quiet kitchen operation.

Soil Sensor

Monitors water turbidity during the cycle to determine the optimal cycle duration and water usage for each load.

Hard Food Disposer

Built-in food disposer grinds up food particles, eliminating the need for pre-rinsing dishes before loading.

Wash Cycle Options

Normal Wash

Standard cycle for everyday dishes with normal soil levels

Heavy Wash

Intensive cleaning for pots, pans, and heavily soiled items

Light Wash

Quick cycle for lightly soiled dishes and glassware

Rinse Only

Rinses dishes without detergent to prevent drying of food particles

Sensor Wash

Automatically adjusts cycle based on soil detection

Power Scour+

High-temperature intensive cleaning for baked-on foods

Troubleshooting

Problem Possible Cause Solution
Dishwasher won't start Power issue, door not latched properly Check power supply, ensure door is closed completely and latched
Poor cleaning results Overloading, wrong detergent, spray arm obstruction Rearrange load properly, use recommended detergent, check spray arms
Water not draining Drain hose clogged, filter blocked Check drain hose for obstructions, clean filter assembly
Leaking water Door not sealed, overfilling, loose connections Check door gasket, ensure proper detergent amount, check connections
Unusual noises Foreign objects in pump, spray arm hitting dishes Check for foreign objects, rearrange load to prevent interference
Dishes not drying Rinse aid empty, heated dry option off Refill rinse aid dispenser, ensure heated dry is selected

Error Codes

  • F1: Water heating issue - Check heating element and thermostat
  • F2: Water fill issue - Check water supply and inlet valve
  • F3: Drain issue - Check drain hose and pump
  • F4: Water leak detected - Check for leaks and water supply
  • F5: Door switch issue - Ensure door is fully closed and latched
  • F6: Motor issue - Contact service center

Manual Downloads

Current Model Manuals

WDTA50SAKZ

Built-In Dishwasher

WDTA55SAKZ

Stainless Steel Dishwasher

WDT730PAHZ

Front Control Dishwasher

WDF540PADM

Black Stainless Dishwasher

Popular Previous Models

WDT910SAYM

Top Control Dishwasher

WDF750SAKM

Stainless Steel Built-In

WDT720PADM

Front Control Stainless

WDF760SADM

Third Rack Dishwasher

Note: For models not listed here, please visit the Whirlpool Support Website for complete documentation.