Whirlpool Dishwasher Model WDF331PAHS1

User Manual & Installation Guide

Stainless Steel Built-In Dishwasher

Installation Guide

Tools Needed:

  • Adjustable wrench
  • Level
  • Screwdrivers (flat and Phillips)
  • Pliers
  • Tape measure
  • Pipe thread seal tape

Step-by-Step Installation

  1. Prepare Installation Area: Ensure cabinet opening is clean and level. Standard opening should be 24" wide x 34-1/2" high x 24" deep.
  2. Remove Shipping Materials: Remove all protective packaging, tape, and shipping brackets from the dishwasher interior and exterior.
  3. Connect Water Supply: Connect hot water supply line to the water inlet valve. Use only new braided stainless steel supply lines.
  4. Connect Drain Hose: Route drain hose through cabinet opening and connect to drain system with high loop to prevent backflow.
  5. Electrical Connection: Connect to a properly grounded 120V, 60Hz, 15-amp dedicated circuit. Follow local electrical codes.
  6. Position and Secure: Slide dishwasher into opening and level using adjustable feet. Secure to countertop or adjacent cabinets.
  7. Test Operation: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Warning: All installations must be performed by a qualified installer to ensure proper operation and maintain warranty coverage.

Specifications

Model Number WDF331PAHS1
Type Built-In Dishwasher
Color/Finish Stainless Steel
Place Settings 14 Place Settings
Noise Level 49 dBA
Control Type Electronic Touch Controls
Energy Rating ENERGY STARĀ® Certified
Water Consumption 2.9 gallons per cycle (Normal)
Power Requirements 120V, 60Hz, 15A
Dimensions (HxWxD) 33-7/8" x 23-5/8" x 24-1/2"
Weight 105 lbs
Drying System Heated Dry with Fan Assist

Warranty Information

  • Full Warranty: 1 year parts and labor
  • Extended Warranty: 10 years on stainless steel tub and door liner
  • Additional Coverage: Optional extended service plans available

For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com

Key Features

Third Level Rack

Extra upper rack provides additional space for utensils, small items, and cooking tools, maximizing loading capacity and flexibility.

Sensor Cycle

Automatically senses soil level and adjusts water temperature, cycle time, and wash action for optimal cleaning with energy efficiency.

Power Scour Plus

Intensive cleaning cycle with high-temperature wash and extra power to remove baked-on and dried-on foods from pots and pans.

Quiet Partner Sound Insulation

Advanced sound insulation system with multiple layers of sound-absorbing material for quiet operation at only 49 dBA.

Hard Food Disposer

Built-in food disposer grinds up food particles during the wash cycle, eliminating the need for pre-rinsing dishes.

Stainless Steel Interior

Durable stainless steel tub resists stains, odors, and chipping while providing superior cleaning performance and longevity.

Wash Cycle Options

Normal Wash

Standard cycle for everyday dishes with normal soil levels

Heavy Wash

Intensive cleaning for pots, pans, and heavily soiled items

Light Wash

Quick cycle for lightly soiled dishes with reduced water usage

Rinse Only

Rinses dishes without detergent to prevent drying of food particles

Sensor Wash

Automatically adjusts cycle based on soil detection for optimal cleaning

Power Scour

High-temperature cycle for baked-on foods and tough stains

Troubleshooting

Problem Possible Cause Solution
Dishwasher won't start Power issue, door not latched, control lock activated Check power supply, ensure door is closed, deactivate control lock
Poor cleaning results Overloading, incorrect detergent, clogged spray arms Rearrange load properly, use recommended detergent, clean spray arms
Water not draining Drain hose clogged or kinked, drain pump blocked Check drain hose for obstructions, clean drain pump filter
Leaking water Door not sealed, overfilling, loose connections Check door seal, ensure proper loading, check water connections
Unusual noises Spray arm hitting dishes, foreign objects in pump Rearrange load to prevent obstruction, check for foreign objects
Dishes not drying Rinse aid empty, heated dry option off, overloading Refill rinse aid, activate heated dry, reduce load size

Error Codes

  • F1: Water heating issue - Check heating element and temperature sensor
  • F2: Water fill issue - Check water supply and inlet valve
  • F3: Drain issue - Check drain hose and pump
  • F4: Water leak detected - Check for leaks and water supply
  • F5: Door switch issue - Ensure door is properly closed and latched
  • F7: Motor issue - Contact service center

Manual Downloads

Current Model Manuals

WDF331PAHS1

Stainless Steel Built-In Dishwasher

WDF334PAHS1

Stainless Steel with PrintShield

WDF520PADM1

Black Stainless Steel Model

WDF518SAHM1

White Built-In Dishwasher

Popular Previous Models

WDT710PAHZ1

Stainless Steel Top Control

WDF760PADM0

Black Stainless Top Control

WDF540PADM0

Stainless Steel Front Control

WDF750SAYM0

White Top Control Dishwasher

Note: For models not listed here, please visit the Whirlpool Support Website for complete documentation.