Whirlpool Dishwasher Model WDT710PAHB1

User Manual & Installation Guide

Built-In Dishwasher

Installation Guide

Tools Needed:

  • Adjustable wrench
  • Level
  • Screwdrivers (flat and Phillips)
  • Pliers
  • Tape measure
  • Pipe wrench

Step-by-Step Installation

  1. Prepare Installation Area: Ensure cabinet opening meets required dimensions and has proper electrical and plumbing connections.
  2. Remove Shipping Materials: Remove all protective packaging, tape, and shipping bolts from the dishwasher.
  3. Connect Water Supply: Connect hot water supply line to the water inlet valve using new braided stainless steel hose.
  4. Connect Drain Hose: Route drain hose through cabinet opening and connect to drain system with high loop to prevent backflow.
  5. Electrical Connection: Connect to dedicated 120V, 60Hz, 15-amp circuit. Follow local electrical codes.
  6. Position and Secure: Slide dishwasher into opening, level the unit, and secure to countertop and adjacent cabinets.
  7. Test Operation: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Warning: All installations must be performed by a qualified installer to ensure proper operation and maintain warranty coverage.

Specifications

Model Number WDT710PAHB1
Type Built-In Dishwasher
Color/Finish Black Stainless Steel
Place Settings 14 Place Settings
Noise Level 46 dBA
Control Type Hidden Touch Controls
Energy Rating ENERGY STAR® Certified
Water Consumption 2.9 gallons per cycle
Power Requirements 120V, 60Hz, 15A
Dimensions (HxWxD) 33.75 x 23.56 x 22.63 inches
Weight 78 lbs
Cycle Time Range 60-150 minutes

Warranty Information

  • Full Warranty: 1 year parts and labor
  • Extended Warranty: 10 years on stainless steel tub and door liner
  • Additional Coverage: Optional extended service plans available

For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com

Key Features

Third Level Rack

Extra upper rack provides additional space for utensils, small items, and odd-shaped pieces, maximizing loading capacity and flexibility.

Sensor Cycle

Automatically detects soil level and adjusts water temperature, cycle time, and wash action for optimal cleaning while saving energy and water.

Power Scour Zone

Enhanced cleaning zone in the lower rack with targeted jets and increased water pressure to remove tough, baked-on foods.

Soil Sensor

Advanced sensor technology monitors water clarity during the cycle to determine when dishes are clean, preventing over-washing.

Quiet Operation

Sound insulation and advanced motor technology provide quiet operation at only 46 dBA, allowing use during family time.

Hard Food Disposer

Built-in food disposer grinds up food particles, eliminating the need for pre-rinsing dishes before loading.

Wash Cycle Options

Auto Sense

Automatically adjusts cycle based on soil level detection for optimal cleaning efficiency

Heavy

Intensive cleaning for pots, pans, and heavily soiled dishes with extra hot water

Normal

Standard cycle for everyday dishes with normal soil levels

Light

Quick cycle for lightly soiled dishes and glassware with reduced water usage

Rinse Only

Quick rinse to prevent dried-on food without running full wash cycle

Sanitize

High-temperature wash with final rinse that reaches 155°F to eliminate bacteria

Troubleshooting

Problem Possible Cause Solution
Dishwasher won't start Power issue, door not latched properly Check power supply, ensure door is closed completely and latched
Poor cleaning results Overloading, incorrect loading, wrong detergent Rearrange dishes properly, use recommended detergent, check water temperature
Water not draining Drain hose clogged, air gap blocked Check drain hose for obstructions, clean air gap and filter
Leaking water Door not sealed, overfilling, loose connections Check door seal, ensure proper detergent amount, check connections
Unusual noises Spray arm obstruction, foreign objects in pump Check for obstructions in spray arms, remove foreign objects
Dishes not drying Rinse aid empty, high humidity drying option selected Refill rinse aid, select heated dry option

Error Codes

  • F1: Water inlet issue - Check water supply and inlet valve
  • F2: Drain issue - Check drain hose and pump
  • F3: Water temperature issue - Check heating element
  • F4: Water level issue - Check float switch and water inlet
  • F5: Door switch issue - Ensure door is properly closed
  • F7: Heater issue - Check heating element and thermostat

Manual Downloads

Current Model Manuals

WDT710PAHB1

Black Stainless Steel Dishwasher

WDT710PAHZ0

White Dishwasher

WDT710SAHZ1

Stainless Steel Dishwasher

WDT730PAHZ0

Black Stainless with Handle

Popular Previous Models

WDF540PADM1

Previous Generation Model

WDT970SAHZ0

Top Control Dishwasher

WDF750SAYM0

Fingerprint Resistant

WDT750SAHZ0

Stainless Steel Built-In

Note: For models not listed here, please visit the Whirlpool Support Website for complete documentation.