Whirlpool Dishwasher Model WDT710PAHZ1

User Manual & Installation Guide

Built-In Dishwasher

Installation Guide

Tools Needed:

  • Adjustable wrench
  • Screwdrivers (flat and Phillips)
  • Level
  • Tape measure
  • Pipe wrench
  • Drill with bits

Step-by-Step Installation

  1. Prepare Installation Area: Ensure cabinet opening is clean and level. Standard opening should be 24" wide x 34-1/2" high x 24" deep.
  2. Remove Shipping Materials: Remove all protective packaging, tape, and shipping brackets from the dishwasher.
  3. Connect Water Supply: Connect hot water supply line to the water inlet valve. Use only new braided stainless steel supply lines.
  4. Connect Drain Hose: Route drain hose through cabinet opening and connect to drain system with high loop to prevent backflow.
  5. Electrical Connection: Connect to a dedicated 120V, 60Hz, 15-amp circuit. Follow local electrical codes for proper grounding.
  6. Position and Level: Slide dishwasher into opening and adjust leveling legs to ensure unit is level and properly aligned with cabinets.
  7. Secure to Countertop: Use mounting brackets to secure the dishwasher to the underside of the countertop.
  8. Test Operation: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Warning: All installations must be performed by a qualified installer to ensure proper operation and maintain warranty coverage.

Specifications

Model Number WDT710PAHZ1
Type Built-In Dishwasher
Color/Finish Stainless Steel / Black
Place Settings 14 Place Settings
Noise Level 46 dBA
Control Type Electronic Touch Controls with LED Display
Energy Rating ENERGY STARĀ® Certified
Water Consumption 2.9 gallons per cycle (Normal Wash)
Power Requirements 120V, 60Hz, 15A
Dimensions (HxWxD) 34-1/2" x 23-5/8" x 24-1/2"
Weight 105 lbs
Drying System Heated Dry with Fan Assist

Warranty Information

  • Full Warranty: 1 year parts and labor
  • Motor Warranty: 10 years on Direct Drive Motor
  • Racks Warranty: Lifetime on stainless steel tub and rack
  • Additional Coverage: Optional extended warranty available

For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com

Key Features

Third Level Rack

Extra upper rack provides additional space for utensils, small dishes, and cooking tools, maximizing loading capacity and flexibility.

Power ScourĀ® Spray Arm

High-pressure spray jets target and remove tough, baked-on foods from pots, pans, and dishes for superior cleaning performance.

Sensor Cycle

Advanced soil sensors automatically detect how dirty dishes are and adjust water temperature, cycle time, and wash action accordingly.

Hard Food Disposer

Built-in food disposer grinds up food particles, eliminating the need to pre-rinse dishes and preventing drain clogs.

Quiet Operation

Sound insulation and advanced motor technology provide quiet operation at only 46 dBA, making it one of the quietest dishwashers available.

Steam Clean Option

Steam function helps to remove tough, dried-on foods and sanitize dishes, providing superior cleaning and hygiene.

Wash Cycle Options

Normal Wash

Standard cycle for everyday dishes with normal soil levels

Heavy Wash

Intensive cleaning for pots, pans, and heavily soiled items

Light Wash

Quick cycle for lightly soiled dishes and glassware

Rinse Only

Rinses dishes without detergent to prevent drying of food particles

Sensor Cycle

Automatically adjusts wash based on soil detection

Steam Clean

Uses steam to remove tough stains and sanitize dishes

Troubleshooting

Problem Possible Cause Solution
Dishwasher won't start Power issue, door not latched properly Check power supply, ensure door is closed completely and latched
Poor cleaning results Overloading, wrong detergent, spray arms blocked Rearrange load, use recommended detergent, clean spray arms
Water not draining Drain hose clogged, filter blocked Check drain hose for obstructions, clean filter system
Leaking water Door not sealed, overfilling, loose connections Check door seal, ensure proper loading, check water connections
Unusual noises Spray arm hitting dishes, foreign objects in pump Rearrange load, check for foreign objects in pump area
Dishes not drying Rinse aid empty, heated dry option off Refill rinse aid dispenser, ensure heated dry is selected

Error Codes

  • F1: Water supply issue - Check water supply and inlet valve
  • F2: Drain issue - Check drain hose and pump
  • F3: Temperature sensor issue - Contact service center
  • F4: Overflow detected - Check for leaks and water level
  • F5: Motor control issue - Contact service center
  • F6: Heater issue - Contact service center

Manual Downloads

Current Model Manuals

WDT710PAHZ1

Built-In Dishwasher with Third Rack

WDT730PAHZ1

Built-In Dishwasher with Controls on Top

WDT750SAHZ1

Built-In Dishwasher with Stainless Steel Interior

WDT770SAHZ1

Built-In Dishwasher with Advanced Controls

Popular Previous Models

WDF540PADM1

Built-In Dishwasher with Hard Food Disposer

WDT910SAYM1

Built-In Dishwasher with Third Rack

WDF750SAYM1

Built-In Dishwasher with Stainless Steel Tub

WDT720PADM1

Built-In Dishwasher with Power Scour

Note: For models not listed here, please visit the Whirlpool Support Website for complete documentation.