Whirlpool Dishwasher Model WDT970SAKZ

User Manual & Installation Guide

Stainless Steel Finish

Installation Guide

Tools Needed:

  • Adjustable wrench
  • Level
  • Screwdrivers (flat and Phillips)
  • Pipe wrench
  • Tape measure
  • Drill with bits

Step-by-Step Installation

  1. Prepare Installation Area: Select location under countertop with access to plumbing and electrical connections on a solid, level surface.
  2. Remove Packaging Materials: Remove all shipping materials, tape, and protective coverings from the dishwasher.
  3. Connect Water Supply: Connect hot water supply line to the water inlet valve using new braided stainless steel hose.
  4. Connect Drain Hose: Route the drain hose to the garbage disposal or sink drain with a high loop to prevent backflow.
  5. Electrical Connection: Connect to a properly grounded 120V, 60Hz, 15A dedicated circuit. Follow local electrical codes.
  6. Level the Dishwasher: Adjust the leveling legs to ensure the dishwasher is level from front to back and side to side.
  7. Secure to Countertop: Use mounting brackets to secure the dishwasher to the underside of the countertop.
  8. Test Run: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Warning: All installations must be performed by a qualified installer to ensure proper operation and maintain warranty coverage.

Specifications

Model Number WDT970SAKZ
Type Built-in Dishwasher
Color/Finish Stainless Steel
Place Settings 16 Place Settings
Noise Level 44 dBA
Control Type Touch Controls with LED Display
Energy Rating ENERGY STARĀ® Certified
Water Consumption 2.9 gallons per cycle
Power Requirements 120V, 60Hz, 15A
Dimensions (HxWxD) 34.5 x 23.75 x 24.5 inches
Weight 125 lbs
Wash Cycles 6 Wash Cycles + 5 Options

Warranty Information

  • Full Warranty: 1 year parts and labor
  • Extended Warranty: 10 years on stainless steel tub and door liner
  • Additional Coverage: Optional extended service plans available

For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com

Key Features

Third Level Rack

Extra top rack provides additional space for utensils, small items, and odd-shaped pieces, maximizing loading capacity and flexibility.

Sensor Cycle

Automatically senses soil level and adjusts water temperature, cycle time, and wash action for optimal cleaning while saving energy and water.

Power Scour Zone

Intensive cleaning zone in the lower rack with targeted spray jets to remove baked-on and dried-on foods from pots and pans.

Quiet Partner Sound Insulation

Advanced sound insulation system reduces operating noise to library-quiet 44 dBA for peaceful kitchen environment.

Soil Sensor

Automatically detects how dirty dishes are and adjusts cycle accordingly, ensuring thorough cleaning while conserving resources.

Hard Food Disposer

Built-in food disposer grinds up food particles, eliminating the need to pre-rinse dishes and preventing drain clogs.

Wash Cycles Explained

Sensor Wash

Automatically adjusts cycle based on soil level detection for everyday loads

Heavy

Intensive cleaning for pots, pans, and heavily soiled dishes

Normal

Standard wash cycle for everyday dishwashing needs

Light

Quick wash for lightly soiled dishes and glassware

Rinse Only

Rinses dishes without detergent to prevent drying of food particles

China/Crystal

Gentle cycle for delicate items, fine china, and crystal

Troubleshooting

Problem Possible Cause Solution
Dishwasher won't start Power issue, door not latched properly, child lock engaged Check power supply, ensure door is latched completely, check child lock
Poor cleaning results Overloading, wrong detergent, spray arms blocked Rearrange load properly, use correct detergent, check spray arms
Water not draining Drain hose clogged or kinked, filter blocked Check drain hose for obstructions, clean filter assembly
Leaking water Door not sealed, overfilling, loose connections Check door seal, ensure proper loading, check connections
Unusual noises Spray arm hitting dishes, foreign objects in pump Rearrange load, check for foreign objects in pump area
Dishes not drying Rinse aid empty, heating element issue Refill rinse aid dispenser, check heating element

Error Codes

  • F1E1: Water supply issue - Check water supply and inlet valve
  • F2E1: Drain issue - Check drain hose and pump
  • F3E1: Heating issue - Check heating element and thermostat
  • F4E1: Water temperature issue - Check water temperature
  • F5E1: Door switch issue - Check door latch and switch
  • F7E1: Motor control issue - Contact service center

Manual Downloads

Current Model Manuals

WDT970SAKZ

Stainless Steel Built-in Dishwasher

WDT970SAHZ

Black Stainless Built-in Dishwasher

WDT750SAKZ

Stainless Steel Dishwasher

WDF560SAKZ

Stainless Steel Front Control

Popular Previous Models

WDT720PADM

Stainless Steel Dishwasher

WDF760SADM

Front Control Dishwasher

WDT910SSYM

Stainless Steel Dishwasher

WDF540PADM

Black Dishwasher

Note: For models not listed here, please visit the Whirlpool Support Website for complete documentation.