Whirlpool Dishwasher Operating Manual

User Manual & Installation Guide

Standard Capacity

Installation Guide

Tools Needed:

  • Adjustable wrench
  • Level
  • Screwdrivers (flat and Phillips)
  • Pliers
  • Tape measure
  • Pipe thread seal tape

Step-by-Step Installation

  1. Choose Installation Location: Select a location near necessary plumbing and electrical connections on a solid, level floor under countertop.
  2. Remove Shipping Materials: Remove all shipping bolts and packaging materials from the dishwasher interior and exterior.
  3. Connect Water Supply: Connect hot water supply line to the water inlet valve. Use only new hoses and apply thread seal tape.
  4. Connect Drain Hose: Route the drain hose into the sink drain or garbage disposal with a high loop to prevent backflow.
  5. Electrical Connection: Connect to a properly grounded 120V, 60Hz, AC only outlet. Do not use an extension cord.
  6. Level the Dishwasher: Adjust the leveling legs to ensure the dishwasher is level from front to back and side to side.
  7. Secure to Countertop: Use mounting brackets to secure the dishwasher to the underside of the countertop.
  8. Test Run: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Warning: All installations must be performed by a qualified installer to ensure proper operation and maintain warranty coverage.

Specifications

Model Series WDT730PAHZ
Type Built-in Dishwasher
Color Stainless Steel / Black
Capacity 14 Place Settings
Noise Level 46 dBA
Control Type Touch Controls with LED Display
Energy Rating ENERGY STARĀ® Certified
Water Consumption 2.9 gallons per cycle
Power Requirements 120V, 60Hz, 15A
Dimensions (HxWxD) 34.5 x 23.8 x 24.5 inches
Weight 105 lbs
Drying System Heated Dry

Warranty Information

  • Full Warranty: 1 year parts and labor
  • Stainless Steel Tub Warranty: 10 years
  • Racks Warranty: 5 years
  • Additional Coverage: Optional extended warranty available

For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com

Key Features

Soil Sensor

Automatically detects how dirty your dishes are and adjusts the wash cycle accordingly, saving time, water, and energy.

Third Rack

Extra rack for utensils and small items, providing more loading flexibility and capacity for your dishware.

Hard Food Disposer

Grinds up food particles during the wash cycle, eliminating the need to pre-rinse dishes before loading.

Stemware Holders

Specialty holders on the top rack securely hold wine glasses and delicate stemware in place during washing.

Cycle Status Lights

LED lights on the floor indicate cycle status, letting you know when your dishes are clean without opening the door.

Sanitize Cycle

Heats water to temperatures that eliminate 99.9% of food soil bacteria for hygienically clean dishes.

Wash Cycle Options

Normal Wash

For everyday cleaning of normally soiled dishes with dried-on food

Heavy Wash

For pots, pans, and heavily soiled dishes with baked-on food

Light Wash

For lightly soiled dishes and quick cleanups with minimal food residue

Rinse Only

Rinses dishes to prevent drying of food soils until a full cycle can be run

China/Crystal

Gentle cycle for fine china, crystal, and delicate dishware

Energy Saver

Energy-efficient cycle that uses less water and electricity

Troubleshooting

Problem Possible Cause Solution
Dishwasher won't start Power issue, door not closed properly, child lock engaged Check power supply, ensure door is latched completely, check child lock
Poor cleaning results Overloading, wrong detergent, incorrect loading Reduce load size, use correct detergent, ensure proper loading
Water not draining Drain hose clogged or kinked, food filter blocked Check drain hose for obstructions, clean food filter
Leaking water Door not sealed, overfilling, loose connections Check door seal, ensure proper detergent amount, check connections
Unusual noises Foreign objects in spray arms, improper loading Check for foreign objects, reload dishes properly
Dishes not drying Rinse aid empty, heated dry option off Refill rinse aid dispenser, select heated dry option

Error Codes

  • F1: Water supply issue - Check water supply and inlet valve
  • F2: Drain issue - Check drain hose and pump
  • F3: Temperature sensor issue - Contact service center
  • F4: Overflow detected - Check for leaks and water supply
  • F5: Door not closed properly - Ensure door is fully closed
  • F6: Motor issue - Contact service center

Manual Downloads

Current Model Manuals

WDT730PAHZ

Standard Capacity Dishwasher

WDT750SAHZ

Stainless Steel Dishwasher

WDF560SAHZ

Front Control Dishwasher

WDP370SAHZ

Top Control Dishwasher

Popular Previous Models

WDF540PADM

Quiet Partner Series

WDT720PADM

Gold Series Dishwasher

DU1055XTSQ

Classic Series

GU3600XTVB

Ultra Capacity

Note: For models not listed here, please visit the Whirlpool Support Website for complete documentation.