Whirlpool Dishwasher WDF330PAHS 5

User Manual & Installation Guide

Built-In Dishwasher

Installation Guide

Tools Needed:

  • Adjustable wrench
  • Level
  • Screwdrivers (flat and Phillips)
  • Pliers
  • Tape measure
  • Drill with bits

Step-by-Step Installation

  1. Prepare Installation Area: Ensure cabinet opening meets required dimensions and has proper electrical and plumbing connections.
  2. Remove Shipping Materials: Remove all protective films, tapes, and shipping braces from the dishwasher.
  3. Connect Water Supply: Connect hot water supply line to the water inlet valve using new braided stainless steel hose.
  4. Connect Drain Hose: Route drain hose through cabinet opening and connect to drain system with high loop to prevent backflow.
  5. Electrical Connection: Connect to dedicated 120V, 60Hz, 15A circuit. Follow local electrical codes for proper grounding.
  6. Position and Level: Slide dishwasher into opening and adjust leveling legs to ensure unit is level and plumb.
  7. Secure to Countertop: Attach mounting brackets to underside of countertop to secure dishwasher in place.
  8. Test Run: Run dishwasher through a complete cycle to check for leaks and proper operation.
Warning: All installations must be performed by a qualified installer to ensure proper operation and maintain warranty coverage.

Specifications

Model Number WDF330PAHS 5
Type Built-In Dishwasher
Color Stainless Steel / Black
Place Settings 14 Place Settings
Noise Level 50 dB
Control Type Electronic Touch Controls
Energy Rating ENERGY STARĀ® Certified
Water Consumption 3.2 gallons per cycle
Power Requirements 120V, 60Hz, 15A
Dimensions (HxWxD) 34.5 x 23.75 x 24.5 inches
Weight 75 lbs
Soil Sensor Yes - Smart Wash Technology

Warranty Information

  • Full Warranty: 1 year parts and labor
  • Extended Warranty: 10 years on stainless steel tub
  • Additional Coverage: Optional extended warranty available

For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com

Key Features

Smart Wash Technology

Advanced soil sensor technology automatically adjusts wash time and temperature based on how dirty your dishes are, ensuring optimal cleaning every time.

Third Rack

Extra third rack provides additional space for cutlery, utensils, and small items, maximizing loading capacity and organization.

Power Scour Zone

Enhanced cleaning zone in the lower rack with targeted jets and increased water pressure to remove tough, baked-on foods.

Quiet Operation

Sound insulation and advanced motor technology provide quiet operation at only 50 dB, allowing for use during family time.

Hard Food Disposer

Built-in hard food disposer grinds up food particles, eliminating the need to pre-rinse dishes before loading.

Energy Efficient

ENERGY STARĀ® certified design uses less water and energy, saving on utility bills while being environmentally friendly.

Wash Cycle Options

Normal Wash

For everyday dishes with normal soil levels - optimal balance of cleaning and energy use

Heavy Wash

Intensive cleaning for pots, pans, and heavily soiled dishes with extra hot water

Light Wash

Gentle cycle for lightly soiled dishes or quick refresh with reduced time and energy

Rinse Only

Quick rinse cycle to prevent dried-on food without running full wash cycle

Sanitize

High-temperature wash that eliminates 99.9% of bacteria for hygienically clean dishes

Delay Start

Program dishwasher to start at later time for convenience and off-peak energy rates

Troubleshooting

Problem Possible Cause Solution
Dishwasher won't start Power issue, door not latched properly Check power supply, ensure door is closed completely and latched
Poor cleaning results Overloading, wrong detergent, spray arms blocked Rearrange load, use recommended detergent, check spray arms for obstructions
Water not draining Drain hose clogged or kinked, filter blocked Check drain hose, clean filter and drain basket
Leaking water Door not sealed, overfilling, loose connections Check door seal, ensure proper detergent amount, check water connections
Unusual noises Foreign objects in pump, spray arms hitting dishes Check for foreign objects, rearrange dishes properly
Dishes not drying Rinse aid empty, high humidity drying selected Refill rinse aid, select heated dry option

Error Codes

  • F1: Water heating issue - Check heating element and thermostat
  • F2: Water fill issue - Check water supply and inlet valve
  • F3: Drain issue - Check drain pump and hose
  • F4: Water leak detected - Check for leaks and door seal
  • F5: Door switch issue - Ensure door is properly closed
  • F6: Motor control issue - Contact service center

Manual Downloads

Current Model Manuals

WDF330PAHS 5

Built-In Dishwasher with Third Rack

WDF540PADM 5

Built-In Dishwasher with PrintShield

WDT730PAHZ 5

Built-In Dishwasher with Sensor Cycle

WDT970SAJZ 5

Top Control Built-In Dishwasher

Popular Previous Models

WDF520PADM 5

Built-In Dishwasher with Hard Food Disposer

WDF750SAYM 5

Built-In Dishwasher with Stainless Steel Interior

WDT710PAYM 5

Built-In Dishwasher with Clean Water Wash

WDT910SAYM 5

Built-In Dishwasher with Power Clean

Note: For models not listed here, please visit the Whirlpool Support Website for complete documentation.