whirlpool dishwasher wdf520padm3 manual

User Manual & Installation Guide

WDF520PADM3

Installation Guide

Tools Needed:

  • Adjustable wrench
  • Level
  • Screwdrivers (flat and Phillips)
  • Pliers
  • Tape measure
  • Pipe thread seal tape

Step-by-Step Installation

  1. Choose Installation Location: Select a location near water supply, drain, and electrical connections on a solid, level floor under counter.
  2. Remove Shipping Materials: Remove all shipping bolts and packaging materials from the dishwasher interior and exterior.
  3. Connect Water Supply: Connect hot water supply line to the water inlet valve. Use only new hoses and apply pipe thread seal tape.
  4. Connect Drain Hose: Route the drain hose into sink drain or garbage disposal with a high loop to prevent backflow.
  5. Electrical Connection: Connect to a properly grounded 120V, 60Hz, AC only outlet. Do not use an extension cord.
  6. Level the Dishwasher: Adjust the leveling legs to ensure the dishwasher is level from front to back and side to side.
  7. Secure to Countertop: Use mounting brackets to secure the dishwasher to the underside of the countertop.
  8. Test Run: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Warning: All installations must be performed by a qualified installer to ensure proper operation and maintain warranty coverage.

Specifications

Model Number WDF520PADM3
Type Built-in Dishwasher
Color Stainless Steel / Black
Place Settings 14 Place Settings
Noise Level 46 dB
Control Type Electronic Touch Controls
Energy Rating ENERGY STARĀ® Certified
Water Consumption 2.9 gallons per cycle
Power Requirements 120V, 60Hz, 15A
Dimensions (HxWxD) 34.5 x 23.75 x 24.5 inches
Weight 105 lbs
Wash Cycles 5 Wash Cycles

Warranty Information

  • Full Warranty: 1 year parts and labor
  • Extended Warranty: 10 years on stainless steel tub
  • Additional Coverage: Optional extended warranty available

For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com

Key Features

Soil Sensor

Automatically detects how dirty your dishes are and adjusts the wash cycle accordingly, saving water and energy while ensuring optimal cleaning performance.

Third Level Rack

Extra upper rack provides additional space for cutlery, utensils, and small items, maximizing loading capacity and organization flexibility.

Hard Food Disposer

Built-in food disposer grinds up food particles during the wash cycle, eliminating the need for pre-rinsing dishes before loading.

Clean Water Wash System

Advanced filtration system ensures only clean water is used throughout the wash cycle, providing superior cleaning results for all dish types.

Quiet Operation

Sound insulation and advanced motor technology provide quiet operation at only 46 dB, making it ideal for open-concept living spaces.

Energy Efficient

ENERGY STARĀ® certified with advanced water and energy saving technologies that reduce environmental impact and operating costs.

Wash Cycles Explained

Normal Wash

Standard cycle for everyday dishes with normal soil levels

Heavy Wash

Intensive cleaning for pots, pans, and heavily soiled items

Light Wash

Quick cycle for lightly soiled dishes and glassware

Rinse Only

Rinses dishes without detergent to prevent drying of food particles

Sanitize

High-temperature cycle that eliminates 99.9% of bacteria

Delay Start

Program dishwasher to start at a later time for convenience

Troubleshooting

Problem Possible Cause Solution
Dishwasher won't start Power issue, door not closed properly Check power supply, ensure door is latched completely
Poor cleaning results Overloading, wrong detergent, incorrect program Reduce load size, use correct detergent, select appropriate program
Water not draining Drain hose clogged or kinked Check drain hose for obstructions or kinks, clean filter
Leaking water Door not sealed, overfilling, loose connections Check door seal, ensure proper detergent amount, check connections
Unusual noises Foreign objects in spray arms, unbalanced load Check for foreign objects, redistribute load evenly
Dishes not drying Rinse aid empty, improper loading Refill rinse aid, ensure proper loading for water drainage

Error Codes

  • F1: Water supply issue - Check water supply and inlet valve
  • F2: Drain issue - Check drain hose and pump
  • F3: Temperature sensor issue - Contact service center
  • F4: Water leak detected - Check for leaks and water supply
  • F5: Door not closed properly - Ensure door is fully closed
  • F6: Motor issue - Contact service center

Manual Downloads

Current Model Manuals

WDF520PADM3

14 Place Setting Dishwasher

WDF540PADM3

14 Place Setting with Steam

WDF560PADM3

15 Place Setting Dishwasher

WDF520PADB3

Black Stainless Steel

Popular Previous Models

WDF750SAYM0

15 Place Setting

WDT730PAHZ0

Standard Capacity

WDF760SADM0

Stainless Steel

WDT970SAHZ0

Tall Tub Design

Note: For models not listed here, please visit the Whirlpool Support Website for complete documentation.