Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
- Pipe wrench
Step-by-Step Installation
- Prepare Installation Area: Ensure cabinet opening meets required dimensions and has proper electrical and plumbing access.
- Remove Shipping Materials: Remove all protective films, tapes, and shipping braces from the dishwasher interior.
- Connect Water Supply: Connect hot water supply line to the water inlet valve. Use only new braided stainless steel hose.
- Connect Drain Hose: Route the drain hose through the cabinet opening and connect to drain system with high loop installation.
- Electrical Connection: Connect to a dedicated 120V, 60Hz, 15-amp circuit with proper grounding. Follow local electrical codes.
- Position and Level: Slide dishwasher into opening and adjust leveling legs to ensure unit is plumb and level.
- Secure Unit: Secure dishwasher to countertop or adjacent cabinets using mounting brackets provided.
- Test Run: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Specifications
| Model Number | WDPA70SAMZ |
| Type | Built-in Dishwasher |
| Color/Finish | Stainless Steel / Black |
| Place Settings | 14 Place Settings |
| Noise Level | 49 dB |
| Control Type | Electronic Touch Controls |
| Energy Rating | ENERGY STAR® Certified |
| Water Consumption | 2.9 gallons per cycle |
| Power Requirements | 120V, 60Hz, 15A |
| Dimensions (HxWxD) | 34.5 x 23.8 x 24.5 inches |
| Weight | 95 lbs |
| Drying System | Heat Dry with Fan Assist |
Warranty Information
- Full Warranty: 1 year parts and labor
- Extended Warranty: 10 years on stainless steel tub
- Additional Coverage: Optional extended service plans available
For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com
Key Features
Sensor Cycle Technology
Automatically senses soil level and adjusts water temperature, cycle time, and wash action for optimal cleaning performance while saving energy and water.
Third Level Rack
Additional top rack provides extra space for utensils, small lids, and cooking tools, maximizing loading capacity and organization flexibility.
Power Scrub Plus
Advanced wash system with targeted spray jets and high-pressure cleaning action to remove tough, baked-on food particles effectively.
Soil Sensor
Intelligent sensor detects food soil levels and adjusts cycle parameters automatically for thorough cleaning with optimal resource usage.
Quiet Operation
Sound insulation and advanced motor technology provide quiet operation at just 49 dB, making it ideal for open-concept living spaces.
Hard Food Disposer
Built-in food disposer grinds up small food particles, eliminating the need for pre-rinsing and preventing drain clogs.
Wash Cycle Options
Auto Cycle
Automatically adjusts wash time and temperature based on soil level detection
Heavy Cycle
Intensive cleaning for pots, pans, and heavily soiled dishes
Normal Cycle
Standard cleaning for everyday dishes with normal soil levels
Light Cycle
Quick wash for lightly soiled dishes with reduced water and energy usage
Rinse Only
Quick rinse to prevent dried-on food without running full wash cycle
Sanitize Cycle
High-temperature wash that eliminates 99.9% of bacteria for hygienic cleaning
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dishwasher won't start | Power issue, door not latched properly, child lock engaged | Check power supply, ensure door is closed completely, check child lock setting |
| Poor cleaning results | Overloading, incorrect loading, wrong detergent, clogged spray arms | Rearrange load properly, use recommended detergent, clean spray arms |
| Water not draining | Drain hose clogged or kinked, drain filter blocked | Check drain hose for obstructions, clean drain filter |
| Leaking water | Door not sealed, overfilling, loose connections | Check door seal and gasket, ensure proper detergent amount, check connections |
| Unusual noises | Foreign objects in pump, spray arm obstruction | Check for foreign objects, ensure spray arms rotate freely |
| Dishes not drying | Rinse aid empty, heating element issue, wet load setting | Refill rinse aid, check heating element, use heat dry option |
Error Codes
- F1: Water supply issue - Check water supply and inlet valve
- F2: Drain issue - Check drain hose and pump
- F3: Temperature sensor error - Contact service center
- F4: Overflow detected - Check for leaks and water level
- F5: Heating element issue - Contact service center
- F6: Motor control board error - Contact service center
Manual Downloads
Current Model Manuals
WDPA70SAMZ
Built-in Dishwasher with Third Rack
WDPA70SAHZ
Built-in Dishwasher with Hard Food Disposer
WDPA70SASZ
Built-in Dishwasher Stainless Steel
WDPA70SAWZ
Built-in Dishwasher White
Popular Previous Models
WDF750SAHZ
Built-in Dishwasher with Sensor Cycle
WDT970SAHZ
Built-in Dishwasher with Power Scrub
WDT730PAHZ
Built-in Dishwasher with Third Rack
WDF540PADM
Built-in Dishwasher with Hard Food Disposer