Whirlpool Dishwasher WDT750SAKZ

Installation Manual & User Guide

Built-In Dishwasher

Installation Guide

Tools Needed:

  • Adjustable wrench
  • Level
  • Screwdrivers (flat and Phillips)
  • Pipe wrench
  • Tape measure
  • Drill with bits

Step-by-Step Installation

  1. Prepare Installation Area: Ensure cabinet opening meets required dimensions and is level. Remove any old dishwasher and clean the area.
  2. Check Electrical Requirements: Verify 120V, 60Hz dedicated circuit with proper grounding is available.
  3. Install Water Supply: Connect hot water supply line using new braided stainless steel hose. Ensure water shut-off valve is accessible.
  4. Connect Drain Hose: Route drain hose to drain connection with high loop to prevent backflow. Use hose clamp for secure connection.
  5. Position Dishwasher: Carefully slide dishwasher into cabinet opening, being careful not to kink water lines or drain hose.
  6. Secure to Countertop: Use mounting brackets to secure dishwasher to underside of countertop for stability.
  7. Level the Dishwasher: Adjust leveling legs to ensure dishwasher is level from front to back and side to side.
  8. Final Connections: Connect electrical supply, turn on water supply, and check all connections for leaks.
  9. Test Run: Run dishwasher through a complete cycle to check for proper operation and leaks.
Warning: Installation must be performed by a qualified technician. Electrical and plumbing connections must comply with local codes.

Specifications

Model Number WDT750SAKZ
Type Built-In Dishwasher
Color Stainless Steel / Black
Place Settings 14 Place Settings
Noise Level 46 dBA
Control Type Electronic Touch Controls
Energy Rating ENERGY STARĀ® Certified
Water Consumption 2.9 gallons per cycle
Power Requirements 120V, 60Hz, 15A
Dimensions (HxWxD) 34.5 x 23.8 x 24.5 inches
Weight 105 lbs
Wash Cycles 6 Wash Cycles

Warranty Information

  • Full Warranty: 1 year parts and labor
  • Extended Warranty: 10 years on stainless steel tub
  • Additional Coverage: Optional extended service plans available

For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com

Key Features

Third Level Rack

Extra top rack provides additional space for utensils, small items, and odd-shaped pieces, maximizing loading capacity and flexibility.

Soil Sensor

Advanced sensor technology automatically detects soil levels and adjusts water temperature and cycle time for optimal cleaning performance.

Power Scour Zone

Focused cleaning zone with targeted spray jets removes tough, baked-on foods from pots, pans, and heavily soiled items.

Quiet Operation

Sound insulation and advanced motor technology provide whisper-quiet operation at just 46 dBA, perfect for open-concept living spaces.

Hard Food Disposer

Built-in food disposer grinds and filters food particles, eliminating the need for pre-rinsing dishes before loading.

Sanitize Cycle

High-temperature wash and final rinse options eliminate 99.9% of household bacteria for hygienically clean results.

Wash Cycle Options

Normal Wash

Ideal for everyday dishes with normal soil levels

Heavy Wash

Intensive cleaning for pots, pans, and baked-on foods

Light Wash

Gentle cycle for lightly soiled dishes and glassware

Rinse Only

Quick rinse to prevent dried-on food until full load

Sanitize

High-temperature cycle to eliminate bacteria

Delay Start

Program dishwasher to run during off-peak hours

Troubleshooting

Problem Possible Cause Solution
Dishwasher won't start Power issue, door not latched, control lock activated Check power supply, ensure door is closed, check control lock setting
Poor cleaning results Overloading, incorrect detergent, spray arm obstruction Rearrange load properly, use recommended detergent, clean spray arms
Water not draining Drain hose clogged, air gap blocked, filter needs cleaning Check drain hose, clean air gap, clean filter assembly
Leaking water Door not sealed, overfilling, loose connections Check door seal, ensure proper loading, check water connections
Unusual noises Spray arm obstruction, foreign objects in pump Check for obstructions in spray arms, inspect pump area
Dishes not drying Rinse aid empty, high humidity, plastic items Refill rinse aid, use heated dry option, separate plastic items

Error Codes

  • F1: Water fill issue - Check water supply and inlet valve
  • F2: Drain issue - Check drain hose and pump
  • F3: Temperature sensor issue - Contact service center
  • F4: Heater issue - Contact service center
  • F5: Leak detected - Check for leaks and water supply
  • F6: Motor control issue - Contact service center

Manual Downloads

Current Model Manuals

WDT750SAKZ

Built-In Dishwasher with Third Rack

WDT730PAHZ

Built-In Dishwasher with PrintShield

WDF760SAKZ

Built-In Dishwasher with Stainless Steel

WDT970SAKZ

High-Efficiency Built-In Dishwasher

Popular Previous Models

WDT720PADM

Built-In Dishwasher with Controls

WDF760SAYM

Built-In Dishwasher with Stainless

WDT910SAYM

Built-In Dishwasher with Third Rack

WDF540PADM

Built-In Dishwasher with PrintShield

Note: For models not listed here, please visit the Whirlpool Support Website for complete documentation.