Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
- Pipe thread seal tape
Step-by-Step Installation
- Choose Installation Location: Select a location near necessary plumbing and electrical connections in a standard 24-inch cabinet opening.
- Remove Packaging Materials: Remove all shipping materials, protective films, and transit bolts from the dishwasher.
- Connect Water Supply: Connect hot water supply line to the water inlet valve. Use only new hoses and apply pipe thread seal tape.
- Connect Drain Hose: Route the drain hose into a standpipe or garbage disposal with a high loop to prevent backflow.
- Electrical Connection: Connect to a properly grounded 120V, 60Hz, AC only outlet. Dedicated circuit recommended.
- Level the Dishwasher: Adjust the leveling legs to ensure the dishwasher is level from front to back and side to side.
- Secure to Countertop: Use mounting brackets to secure the dishwasher to the underside of the countertop.
- Test Run: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Specifications
| Model Number | WDT750SAKZ0 |
| Type | Built-In Dishwasher |
| Color | Stainless Steel / Black |
| Place Settings | 14 Place Settings |
| Noise Level | 46 dBA |
| Control Type | Electronic Touch Controls with LED Display |
| Energy Rating | ENERGY STAR® Certified |
| Water Consumption | 2.9 gallons per cycle |
| Power Requirements | 120V, 60Hz, 15A |
| Dimensions (HxWxD) | 34.5 x 23.8 x 24.5 inches |
| Weight | 105 lbs |
| Wash Cycles | 6 Wash Cycles + 5 Options |
Warranty Information
- Full Warranty: 1 year parts and labor
- Motor Warranty: 10 years on Direct Drive Motor
- Racks & Tub: Lifetime limited warranty
- Additional Coverage: Optional extended warranty available
For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com
Key Features
Third Level Rack
Extra rack for cutlery and utensils, providing more loading flexibility and capacity for up to 14 place settings.
Power Scour® Spray Arm
High-pressure spray jets target and remove tough, baked-on foods from pots, pans, and dishes.
Soil Sensor
Automatically detects how dirty dishes are and adjusts the cycle time and water usage accordingly.
Hard Food Disposer
Grinds up food particles during the wash cycle, eliminating the need for pre-rinsing dishes.
Quiet Partner® Sound Insulation
Advanced sound insulation keeps noise levels as low as 46 dBA for quiet operation.
Sanitize Cycle
NSF certified cycle that eliminates 99.999% of food soil bacteria for hygienically clean dishes.
Wash Cycles Explained
Normal Wash
For everyday cleaning of normally soiled dishes with dried-on food particles
Heavy Wash
Intensive cleaning for pots, pans, and heavily soiled dishes with baked-on foods
Light Wash
Quick cycle for lightly soiled dishes, glasses, and plates with minimal soil
Rinse Only
Rinses dishes to prevent drying of food soils until a full cycle can be run
Sanitize
High-temperature wash that eliminates bacteria and provides hygienic cleaning
Express Wash
Quick 30-minute cycle for lightly soiled loads when you're in a hurry
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dishwasher won't start | Power issue, door not closed properly, child lock engaged | Check power supply, ensure door is latched completely, check child lock |
| Poor cleaning results | Overloading, wrong detergent, incorrect loading | Reduce load size, use correct detergent, ensure proper loading |
| Water not draining | Drain hose clogged or kinked, filter blocked | Check drain hose for obstructions, clean filter system |
| Leaking water | Door not sealed, overfilling, loose connections | Check door seal, ensure proper detergent amount, check connections |
| Unusual noises | Foreign objects in spray arms, improper loading | Check spray arms for obstructions, reload dishes properly |
| Dishes not drying | Rinse aid empty, high humidity drying option selected | Refill rinse aid, select heated dry option |
Error Codes
- F1: Water supply issue - Check water supply and inlet valve
- F2: Drain issue - Check drain hose and pump
- F3: Temperature sensor issue - Contact service center
- F4: Overflow detected - Check for leaks and water supply
- F5: Motor issue - Contact service center
- F6: Heater issue - Contact service center
- F7: Control panel communication error - Reset dishwasher
- F8: Door switch issue - Ensure door is fully closed
Manual Downloads
Current Model Manuals
WDT750SAKZ0
Built-In Dishwasher with Third Rack
WDT750SAHZ0
Built-In Dishwasher with Hard Food Disposer
WDT970SAKZ0
Top Control Built-In Dishwasher
WDF750SAKZ0
Front Control Built-In Dishwasher
Popular Previous Models
WDT720PADM0
Built-In Dishwasher with Power Scour
WDT910SAYM0
Built-In Dishwasher with Sensor Cycle
WDF760SADM0
Front Control Dishwasher with Third Rack
WDT730PAHZ0
Built-In Dishwasher with Hard Food Disposer