Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
- Pipe thread seal tape
Step-by-Step Installation
- Prepare Installation Area: Ensure cabinet opening is clean, level, and meets required dimensions (24" width minimum).
- Remove Shipping Materials: Remove all protective films, shipping bolts, and packaging materials from the dishwasher.
- Connect Water Supply: Connect hot water supply line to the water inlet valve using new braided stainless steel hose.
- Connect Drain Hose: Route drain hose through cabinet opening and connect to drain system with high loop to prevent backflow.
- Electrical Connection: Connect to a dedicated 120V, 60Hz, 15A grounded electrical circuit. Follow local electrical codes.
- Level the Dishwasher: Adjust leveling legs to ensure dishwasher is level from front to back and side to side.
- Secure to Countertop: Use mounting brackets to secure dishwasher to underside of countertop.
- Test Run: Run dishwasher through a complete cycle to check for leaks and proper operation.
Specifications
| Model Number | WDT970SAHZ |
| Type | Built-In Dishwasher |
| Color/Finish | Stainless Steel |
| Place Settings | 14 Place Settings |
| Noise Level | 44 dBA (Quiet) |
| Control Type | Hidden Touch Controls with LED Display |
| Energy Rating | ENERGY STAR® Certified |
| Water Consumption | 2.9 gallons per cycle (Normal Wash) |
| Power Requirements | 120V, 60Hz, 15A |
| Dimensions (HxWxD) | 33.75 x 23.56 x 24.25 inches |
| Weight | 105 lbs |
| Drying System | Third Level™ Drying with Fan Assist |
Warranty Information
- Full Warranty: 1 year parts and labor
- Motor Warranty: 10 years on Direct Drive Motor
- Racks & Tub: Lifetime limited warranty
- Additional Coverage: Optional extended warranty available
For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com
Key Features
Third Level™ Drying
Advanced drying system uses a dedicated fan to circulate heated air, ensuring all items including plastics are thoroughly dried without water spots.
Sensor Cycle
Intelligent sensors automatically detect soil levels and adjust water temperature, cycle time, and wash actions for optimal cleaning performance.
Stainless Steel Tub
Premium stainless steel interior resists stains, odors, and provides superior durability while helping to maintain water temperature.
Quiet Operation
Advanced sound insulation and direct drive motor technology provide whisper-quiet operation at only 44 dBA.
Fingerprint Resistant
Stainless steel exterior features fingerprint-resistant coating to maintain clean appearance with minimal maintenance.
Soil Sensor
Automatically detects how dirty dishes are and adjusts cycle accordingly, saving water and energy when dishes are lightly soiled.
Wash Cycle Options
Normal Wash
Everyday cycle for normally soiled dishes with optimal cleaning and energy efficiency
Heavy Wash
Intensive cleaning for pots, pans, and heavily soiled dishes with extra hot water
Light Wash
Quick cycle for lightly soiled dishes with reduced water and energy consumption
Rinse Only
Quick rinse to prevent dried-on food without using detergent
Sensor Cycle
Automatically adjusts wash based on soil detection for optimal results
Sanitize Cycle
High-temperature wash that eliminates 99.9% of food soil bacteria
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dishwasher won't start | Power issue, door not latched properly | Check power supply, ensure door is closed and latched completely |
| Poor cleaning results | Overloading, wrong detergent, spray arms blocked | Rearrange load properly, use recommended detergent, check spray arms |
| Water not draining | Drain hose clogged, filter blocked | Check drain hose for obstructions, clean filter system |
| Leaking water | Door not sealed, overfilling, loose connections | Check door seal, ensure proper detergent amount, check connections |
| Unusual noises | Foreign objects in pump, spray arms hitting dishes | Check for foreign objects, rearrange load properly |
| Detergent not dispensing | Detergent cup wet, wrong detergent type | Wipe detergent cup dry, use recommended detergent pods or powder |
Error Codes
- F1: Water heating issue - Check heating element and temperature sensor
- F2: Water fill issue - Check water supply and inlet valve
- F3: Drain issue - Check drain pump and hose
- F4: Water overflow detected - Check float switch and water level
- F5: Temperature sensor failure - Contact service center
- F6: Motor control issue - Contact service center
Manual Downloads
Current Model Manuals
WDT970SAHZ
Stainless Steel Dishwasher
WDT970SAH0
Black Stainless Dishwasher
WDT750SAHZ
Stainless Steel Dishwasher
WDF560SAHZ
Stainless Steel Dishwasher
Popular Previous Models
WDT720PADM
Stainless Steel Dishwasher
WDF540PADM
Stainless Steel Dishwasher
WDT910SSYM
Stainless Steel Dishwasher
WDF760SADM
Stainless Steel Dishwasher