Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
- Pipe thread seal tape
Step-by-Step Installation
- Prepare Installation Area: Ensure cabinet opening meets required dimensions and has proper electrical and plumbing connections.
- Remove Shipping Materials: Remove all protective films, tapes, and shipping braces from the dishwasher interior.
- Connect Water Supply: Connect hot water supply line to the water inlet valve using new braided stainless steel hose.
- Connect Drain Hose: Route drain hose through cabinet opening and connect to drain system with high loop to prevent backflow.
- Electrical Connection: Connect to dedicated 120V, 60Hz, 15A circuit. Follow local electrical codes for proper grounding.
- Position and Level: Slide dishwasher into opening and adjust leveling legs to ensure unit is perfectly level.
- Secure to Countertop: Attach mounting brackets to underside of countertop to secure dishwasher in place.
- Test Operation: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Specifications
| Model Number | WDTA50SAKZ |
| Type | Built-In Dishwasher |
| Color/Finish | Stainless Steel / Black |
| Capacity | 14 Place Settings |
| Noise Level | 46 dBA |
| Control Type | Electronic Touch Controls with LED Display |
| Energy Rating | ENERGY STAR® Certified |
| Water Consumption | 2.9 gallons per cycle |
| Power Requirements | 120V, 60Hz, 15A |
| Dimensions (HxWxD) | 33.75 x 23.56 x 24.25 inches |
| Weight | 105 lbs |
| Soil Sensors | Advanced Soil Sensor Technology |
Warranty Information
- Full Warranty: 1 year parts and labor
- Extended Warranty: 10 years on stainless steel tub and door liner
- Additional Coverage: Optional extended service plans available
For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com
Key Features
Third Level Rack
Extra upper rack provides additional space for utensils, spatulas, and small items, maximizing loading capacity and flexibility.
Sensor Cycle Technology
Advanced sensors automatically adjust water temperature, cycle time, and wash action based on soil level for optimal cleaning performance.
Power Scour Zone
Enhanced cleaning zone in the lower rack provides extra scrubbing power for pots, pans, and heavily soiled items.
Hard Food Disposer
Built-in food disposer grinds up food particles, eliminating the need for pre-rinsing dishes before loading.
Quiet Operation
Sound insulation and advanced motor technology ensure quiet operation at only 46 dBA, perfect for open-concept living spaces.
Steam Clean Option
Steam function helps to remove baked-on foods and sanitize dishes, providing superior cleaning for tough loads.
Wash Cycle Options
Auto Cycle
Automatically adjusts time and temperature based on soil sensors for optimal cleaning
Heavy Cycle
Intensive cleaning for pots, pans, and heavily soiled dishes with extra hot water
Normal Cycle
Standard cleaning for everyday dishes with balanced water and energy use
Light Cycle
Quick wash for lightly soiled items with reduced water and energy consumption
Rinse Only
Quick rinse to prevent food from drying on dishes until full load is ready
Sanitize Cycle
High-temperature wash that eliminates 99.9% of household bacteria
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dishwasher won't start | Power issue, door not latched properly | Check power supply, ensure door is closed completely and latched |
| Poor cleaning results | Overloading, incorrect detergent, spray arms blocked | Rearrange load properly, use recommended detergent, check spray arms |
| Water not draining | Drain hose clogged or kinked, filter blocked | Check drain hose for obstructions, clean filter assembly |
| Leaking water | Door not sealed, overfilling, loose connections | Check door gasket, ensure proper detergent amount, check connections |
| Unusual noises | Spray arm hitting dishes, foreign objects in pump | Rearrange load to prevent interference, check for foreign objects |
| Dishes not drying | Rinse aid empty, water temperature too low | Refill rinse aid dispenser, check water heater setting |
Error Codes
- F1: Water supply issue - Check water supply and inlet valve
- F2: Drain issue - Check drain hose and pump
- F3: Temperature sensor error - Contact service center
- F4: Water overflow detected - Check for leaks and water supply
- F5: Motor issue - Contact service center
- F6: Heater error - Contact service center
Manual Downloads
Current Model Manuals
WDTA50SAKZ
Built-In Dishwasher with Third Rack
WDTA55SAKZ
Built-In Dishwasher with Steam
WDT730PAHZ
Front Control Dishwasher
WDF560SAFZ
Stainless Steel Dishwasher
Popular Previous Models
WDF520PADM
Built-In Dishwasher
WDT710PAYM
Energy Efficient Dishwasher
WDF760SADM
Stainless Steel Interior
WDT970SAJZ
Premium Dishwasher