Whirlpool Gold Series Dishwasher

Installation Manual & User Guide

Built-in Dishwasher Series

Installation Guide

Tools Needed:

  • Adjustable wrench
  • Screwdrivers (flat and Phillips)
  • Level
  • Pipe wrench
  • Tape measure
  • Drill with bits

Step-by-Step Installation

  1. Prepare Installation Area: Ensure cabinet opening meets required dimensions and is level. Clear area of debris.
  2. Remove Shipping Materials: Remove all protective films, tapes, and shipping brackets from the dishwasher.
  3. Connect Water Supply: Connect hot water supply line to the water inlet valve. Use only new braided stainless steel hose.
  4. Connect Drain Hose: Route the drain hose through cabinet opening and connect to drain system with high loop installation.
  5. Electrical Connection: Connect to a dedicated 120V, 60Hz, 15-amp circuit. Follow local electrical codes for proper grounding.
  6. Position Dishwasher: Slide dishwasher into cabinet opening, ensuring it's level and plumb with adjacent cabinets.
  7. Secure Installation: Secure dishwasher to countertop or adjacent cabinets using mounting brackets provided.
  8. Test Operation: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Warning: All installations must be performed by a qualified installer to ensure proper operation and maintain warranty coverage.

Specifications

Model Series WDT970SAHZ
Type Built-in Dishwasher
Color Stainless Steel / Black
Place Settings 16 Place Settings
Noise Level 44 dBA
Control Type Touch Controls with LCD Display
Energy Rating ENERGY STARĀ® Certified
Water Consumption 2.9 gallons per cycle
Power Requirements 120V, 60Hz, 15A
Dimensions (HxWxD) 34.5 x 23.8 x 24.5 inches
Weight 125 lbs
Wash Cycles 6 Wash Cycles + 5 Options

Warranty Information

  • Full Warranty: 1 year parts and labor
  • Motor Warranty: 10 years on Direct Drive Motor
  • Racks & Tub: Lifetime limited warranty
  • Additional Coverage: Optional extended warranty available

For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com

Key Features

Third Level Rack

Extra rack for utensils and small items, providing more loading flexibility and maximizing capacity up to 16 place settings.

Power Clean Cycle

High-pressure spray jets and heated wash provide intensive cleaning for heavily soiled pots, pans, and bakeware.

Sensor Cycle Technology

Intelligent sensors automatically adjust water temperature, cycle time, and energy use based on soil level for optimal cleaning.

Steam Clean Option

Steam technology helps remove baked-on foods and sanitize dishes, eliminating the need for pre-rinsing in most cases.

Quiet Operation

Advanced sound insulation and precision engineering deliver ultra-quiet operation at just 44 dBA.

Soil Sensor

Automatically detects soil levels and adjusts cycle parameters accordingly, saving water and energy while ensuring thorough cleaning.

Wash Cycle Options

Auto Sense

Automatically adjusts cycle based on soil level for optimal cleaning and efficiency

Heated Dry

Uses heated air to thoroughly dry dishes and eliminate water spots

Power Clean

Intensive cleaning cycle for heavily soiled pots and pans

Express Wash

Quick 30-minute cycle for lightly soiled loads

China/Crystal

Gentle cycle with lower water temperature for delicate items

Sanitize

High-temperature cycle that eliminates 99.9% of household bacteria

Troubleshooting

Problem Possible Cause Solution
Dishwasher won't start Power issue, door not latched properly Check power supply, ensure door is closed and latched completely
Poor cleaning results Overloading, wrong detergent, spray arms blocked Reduce load size, use correct detergent, check spray arm rotation
Water not draining Drain hose clogged or kinked, filter blocked Check drain hose for obstructions, clean filter assembly
Leaking water Door not sealed, overfilling, loose connections Check door seal, ensure proper detergent amount, check connections
Unusual noises Foreign objects in pump, spray arm hitting dishes Check for foreign objects, rearrange load properly
Dishes not drying Heated dry option off, rinse aid empty Enable heated dry option, refill rinse aid dispenser

Error Codes

  • F1: Water supply issue - Check water supply and inlet valve
  • F2: Drain issue - Check drain hose and pump
  • F3: Temperature sensor issue - Contact service center
  • F4: Overflow detected - Check for leaks and water supply
  • F5: Motor issue - Contact service center
  • F6: Heater issue - Contact service center

Manual Downloads

Current Model Manuals

WDT970SAHZ

Gold Series Built-in Dishwasher

WDT750SAHZ

Gold Series with Third Rack

WDF560SAHZ

Gold Series Front Control

WDT730PAHZ

Gold Series Stainless Steel

Popular Previous Models

WDT920SAHZ

Gold Series with Steam

WDF760SAHZ

Gold Series Front Control

WDT710PAHZ

Gold Series Stainless

WDF540SAHZ

Gold Series Built-in

Note: For models not listed here, please visit the Whirlpool Support Website for complete documentation.