Whirlpool Gold Series Dishwasher

User Manual & Installation Guide

Built-in Dishwasher

Installation Guide

Tools Needed:

  • Adjustable wrench
  • Level
  • Screwdrivers (flat and Phillips)
  • Pipe wrench
  • Tape measure
  • Drill with bits

Step-by-Step Installation

  1. Prepare Installation Area: Ensure cabinet opening meets required dimensions and has proper electrical and plumbing connections.
  2. Remove Shipping Materials: Remove all protective films, shipping bolts, and packaging materials from the dishwasher.
  3. Connect Water Supply: Connect hot water supply line to the water inlet valve using new braided stainless steel hose.
  4. Connect Drain Hose: Route drain hose through cabinet opening and connect to drain system with high loop to prevent backflow.
  5. Electrical Connection: Connect to dedicated 120V, 15A, 60Hz circuit with proper grounding. Follow local electrical codes.
  6. Position and Level: Slide dishwasher into opening and adjust leveling legs to ensure proper alignment with countertop.
  7. Secure Unit: Secure dishwasher to countertop or adjacent cabinets using mounting brackets provided.
  8. Test Run: Run dishwasher through a complete cycle to check for leaks and proper operation.
Warning: All installations must be performed by a qualified installer to ensure proper operation and maintain warranty coverage.

Specifications

Model Series WDT970SAHZ
Type Built-in Dishwasher
Color Stainless Steel / Black
Place Settings 16 Place Settings
Noise Level 44 dBA
Control Type Hidden Touch Controls with LCD Display
Energy Rating ENERGY STAR® Certified
Water Consumption 2.9 gallons per cycle
Power Requirements 120V, 60Hz, 15A
Dimensions (HxWxD) 34.5 x 23.8 x 24.5 inches
Weight 105 lbs
Drying System Third Level Drying with Fan Assist

Warranty Information

  • Full Warranty: 1 year parts and labor
  • Motor Warranty: 10 years on Direct Drive Motor
  • Racks and Tub: Lifetime limited warranty
  • Additional Coverage: Optional extended warranty available

For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com

Key Features

Third Level Drying

Advanced drying system with fan-assisted technology that circulates heated air throughout the tub, including the third rack, for superior drying performance on all rack levels.

Direct Drive Motor

Powerful and reliable motor directly connected to the wash system, providing consistent cleaning performance with reduced noise and increased durability.

Soil Sensor

Intelligent sensor technology automatically detects soil levels and adjusts water temperature, cycle time, and wash actions for optimal cleaning and energy efficiency.

Power Scrub Plus

High-pressure spray jets and targeted cleaning zones provide powerful scrubbing action to remove tough, baked-on foods from pots, pans, and dishes.

Fingerprint Resistant Stainless Steel

Premium stainless steel exterior with special coating that resists fingerprints and smudges, maintaining a clean appearance with minimal maintenance.

Clean Water Wash System

Advanced filtration system with hard food disposer and multiple filters ensures only clean water circulates through the wash system for spot-free results.

Wash Cycle Technology Explained

Sensor Wash

Automatically adjusts cycle based on soil level detection for optimal cleaning

Heated Dry

Uses heated air and fan circulation for complete drying of all items

Power Scrub

Intensive cleaning action for heavily soiled pots and pans

Express Wash

Quick 30-minute cycle for lightly soiled loads

China/Crystal

Gentle cycle with lower water pressure for delicate items

Sanitize

High-temperature cycle that eliminates 99.9% of bacteria

Troubleshooting

Problem Possible Cause Solution
Dishwasher won't start Power issue, door not closed properly, child lock engaged Check power supply, ensure door is latched completely, check control lock
Poor cleaning results Overloading, wrong detergent, incorrect loading Reduce load size, use recommended detergent, follow loading guidelines
Water not draining Drain hose clogged, filter blocked Check drain hose for obstructions, clean filter system
Leaking water Door not sealed, overfilling, loose connections Check door seal, ensure proper detergent amount, check connections
Unusual noises Foreign objects in pump, spray arm obstruction Check for foreign objects, ensure spray arms rotate freely
Dishes not drying Rinse aid empty, heated dry option not selected Refill rinse aid dispenser, select heated dry option

Error Codes

  • F1: Water supply issue - Check water supply and inlet valve
  • F2: Drain issue - Check drain hose and pump
  • F3: Temperature sensor issue - Contact service center
  • F4: Overflow detected - Check for leaks and water level
  • F5: Motor issue - Contact service center
  • F6: Control panel communication error - Reset power

Manual Downloads

Current Model Manuals

WDT970SAHZ

Gold Series Built-in Dishwasher

WDT750SAHZ

Gold Series with Third Rack

WDF560SAHZ

Gold Series Front Control

WDT730PAHZ

Gold Series PrintShield™

Popular Previous Models

WDT920SAHZ

Gold Series with Power Clean

WDF760SAHZ

Gold Series Front Control

WDT710PAHZ

Gold Series Stainless Steel

WDF540PAHZ

Gold Series Built-in

Note: For models not listed here, please visit the Whirlpool Support Website for complete documentation.