Whirlpool Model WDF520PADM7

User Manual & Installation Guide

Dishwasher

Installation Guide

Tools Needed:

  • Adjustable wrench
  • Level
  • Screwdrivers (flat and Phillips)
  • Pliers
  • Tape measure
  • Pipe thread seal tape

Step-by-Step Installation

  1. Choose Installation Location: Select a location near necessary plumbing and electrical connections on a solid, level floor under a countertop.
  2. Remove Shipping Materials: Remove all shipping bolts and packaging materials from the dishwasher interior and exterior.
  3. Connect Water Supply: Connect hot water supply line to the water inlet valve. Use only new hoses and apply pipe thread seal tape.
  4. Connect Drain Hose: Route the drain hose into a standpipe or garbage disposal with a high loop to prevent backflow.
  5. Electrical Connection: Connect to a properly grounded 120V, 60Hz, AC only outlet. Do not use an extension cord.
  6. Level the Dishwasher: Adjust the leveling legs to ensure the dishwasher is level from front to back and side to side.
  7. Secure to Countertop: Use mounting brackets to secure the dishwasher to the underside of the countertop.
  8. Test Run: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Warning: All installations must be performed by a qualified installer to ensure proper operation and maintain warranty coverage.

Specifications

Model Number WDF520PADM7
Type Built-in Dishwasher
Color Stainless Steel / Black
Place Settings 14 Place Settings
Noise Level 49 dB
Control Type Electronic Touch Controls with LED Display
Energy Rating ENERGY STARĀ® Certified
Water Consumption 3.2 gallons per cycle
Power Requirements 120V, 60Hz, 15A
Dimensions (HxWxD) 34.5 x 23.75 x 24.5 inches
Weight 105 lbs
Wash Cycles 6 Wash Cycles

Warranty Information

  • Full Warranty: 1 year parts and labor
  • Motor Warranty: 10 years on Direct Drive Motor
  • Racks Warranty: Lifetime on stainless steel tub and rack
  • Additional Coverage: Optional extended warranty available

For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com

Key Features

Third Level Rack

Extra rack for silverware and utensils, providing more loading flexibility and freeing up space in the main racks for larger items.

Soil Sensor

Automatically detects how dirty your dishes are and adjusts the cycle time and water usage accordingly for optimal cleaning and efficiency.

Hard Food Disposer

Grinds up food particles during the wash cycle, eliminating the need to pre-rinse dishes and preventing drain clogs.

Quiet Operation

Sound insulation and advanced motor technology provide quiet operation at only 49 dB, making it one of the quietest dishwashers available.

Stainless Steel Interior

Stainless steel tub resists stains, odors, and corrosion while providing superior durability and cleaning performance.

Energy Star Certified

Meets strict energy efficiency guidelines, saving you money on utility bills while reducing environmental impact.

Wash Cycles Explained

Normal Wash

For everyday cleaning of normally soiled dishes with optimal water and energy usage

Heavy Wash

Intensive cleaning for pots, pans, and heavily soiled dishes with extra hot water

Light Wash

Quick cycle for lightly soiled dishes or glassware with reduced water and energy consumption

Rinse Only

Rinses dishes without detergent to prevent dried-on food until you're ready to run a full cycle

Sanitize

Uses extra-hot water to eliminate 99.9% of food soil bacteria for hygienically clean dishes

Delay Start

Delays cycle start for up to 24 hours to take advantage of off-peak energy rates

Troubleshooting

Problem Possible Cause Solution
Dishwasher won't start Power issue, door not closed properly Check power supply, ensure door is latched completely
Poor cleaning results Overloading, wrong detergent, incorrect loading Reduce load size, use correct detergent, load dishes properly
Water not draining Drain hose clogged or kinked Check drain hose for obstructions or kinks, clean filter
Leaking water Door not sealed, overfilling, loose connections Check door seal, ensure proper detergent amount, check connections
Unusual noises Foreign objects in spray arms, unbalanced load Check for foreign objects, redistribute dishes evenly
Dishes not drying Rinse aid empty, heating element issue Refill rinse aid, check heating element function

Error Codes

  • F1: Water supply issue - Check water supply and inlet valve
  • F2: Drain issue - Check drain hose and pump
  • F3: Temperature sensor issue - Contact service center
  • F4: Heating element issue - Contact service center
  • F5: Door switch issue - Ensure door is fully closed
  • F6: Motor control issue - Contact service center

Manual Downloads

Current Model Manuals

WDF520PADM7

Built-in Dishwasher

WDF540PADM7

Stainless Steel Dishwasher

WDF750PADM7

Premium Dishwasher

WDF310PADM7

Basic Dishwasher

Popular Previous Models

WDF750SAHM0

Stainless Steel Dishwasher

WDT710PAHM0

Stainless Steel Dishwasher

WDF760SADM0

Stainless Steel Dishwasher

WDT970SAHL0

Premium Dishwasher

Note: For models not listed here, please visit the Whirlpool Support Website for complete documentation.