Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
Step-by-Step Installation
- Choose Installation Location: Select a location near necessary plumbing and electrical connections on a solid, level floor.
- Remove Shipping Materials: Remove all shipping bolts and packaging materials from the dryer.
- Gas Connection (if applicable): Connect gas line using approved connectors and check for leaks with soap solution.
- Ventilation System: Install rigid metal ducting for proper ventilation, ensuring minimal bends and proper exhaust.
- Electrical Connection: Connect to a properly grounded 120V, 60Hz, AC only outlet. Do not use an extension cord.
- Level the Dryer: Adjust the leveling legs to ensure the dryer is level from front to back and side to side.
- Test Run: Run the dryer through a complete cycle to check for proper operation and ventilation.
Specifications
| Model Number | WDTA50SAHZ0 |
| Type | Gas Dryer |
| Color | White |
| Capacity | 5.0 cu. ft. |
| Control Type | Electronic Controls with LED Display |
| Energy Rating | ENERGY STAR® Certified |
| Gas Requirements | Natural Gas |
| Power Requirements | 120V, 60Hz |
| Dimensions (HxWxD) | 43 x 27 x 29 inches |
| Weight | 125 lbs |
| Vent Requirements | 4-inch diameter |
Warranty Information
- Full Warranty: 1 year parts and labor
- Drum Warranty: 10 years on stainless steel drum
- Motor Warranty: 10 years on drive motor
- Additional Coverage: Optional extended warranty available
For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com
Key Features
Advanced Moisture Sensing
Automatically detects when clothes are dry and shuts off, preventing over-drying and saving energy while protecting your fabrics.
Wrinkle Shield™ Option
Periodically tumbles clothes without heat after the cycle ends to help prevent wrinkles from setting in.
AccuDry™ System
Monitors temperature and moisture levels throughout the cycle to deliver consistent drying results cycle after cycle.
Stainless Steel Drum
Durable stainless steel construction resists chipping and rusting, providing long-lasting performance and gentle fabric care.
Quick Dry Cycle
Dries small loads quickly using higher temperatures and increased airflow for when you're in a hurry.
ENERGY STAR® Certified
Meets strict energy efficiency guidelines set by the EPA, saving you money on utility bills while helping protect the environment.
Drying Programs
Auto Dry
Automatically adjusts drying time based on moisture levels for optimal results
Timed Dry
Manual drying with user-selected time from 10 to 180 minutes
Delicates
Gentle low-heat drying for delicate fabrics and special care items
Heavy Duty
Extended high-heat drying for heavily soiled items and bulky fabrics
Quick Dry
Rapid drying cycle for small loads when you need clothes fast
Air Fluff
No-heat tumbling to freshen items or remove lint and pet hair
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dryer won't start | Power issue, door not closed properly, start button not held | Check power supply, ensure door is latched completely, hold start button for 3 seconds |
| Clothes not drying | Lint filter clogged, improper ventilation, overloading | Clean lint filter, check vent system, reduce load size |
| Dryer is noisy | Foreign objects in drum, worn rollers or bearings | Check for foreign objects, inspect drum components |
| Gas odor detected | Gas connection leak, improper combustion | Immediately turn off gas supply and contact qualified technician |
| Error codes displayed | Various system faults detected | Refer to error code chart in manual or contact service |
| Vibration during operation | Unbalanced load, uneven floor, shipping bolts not removed | Redistribute load, level the dryer, ensure shipping bolts removed |
Error Codes
- F01: Control board communication error - Power cycle unit
- F02: Motor triac error - Check motor operation
- F03: Thermistor open circuit - Check temperature sensor
- F04: Thermistor short circuit - Replace temperature sensor
- F05: Heater error - Check heating element
- F07: Moisture sensor error - Clean moisture sensor bars
- F09: Gas ignition failure - Check gas supply and ignition system
Manual Downloads
Current Model Manuals
WDTA50SAHZ0
5.0 cu. ft. Gas Dryer
WED50SAHZ0
5.0 cu. ft. Electric Dryer
WDTA75SAHZ0
7.5 cu. ft. Gas Dryer
WED75SAHZ0
7.5 cu. ft. Electric Dryer
Popular Previous Models
WGD48BASW0
4.8 cu. ft. Gas Dryer
WED48BASW0
4.8 cu. ft. Electric Dryer
WGD72BASW0
7.2 cu. ft. Gas Dryer
WED72BASW0
7.2 cu. ft. Electric Dryer