Whirlpool WDF330PAHS Dishwasher

User Manual & Installation Guide

Built-In Dishwasher

Installation Guide

Tools Needed:

  • Adjustable wrench
  • Level
  • Screwdrivers (flat and Phillips)
  • Pliers
  • Tape measure
  • Pipe thread seal tape

Step-by-Step Installation

  1. Choose Installation Location: Select a location under countertop with access to plumbing and electrical connections.
  2. Remove Packaging Materials: Remove all shipping materials and protective films from the dishwasher.
  3. Connect Water Supply: Connect hot water supply line to the water inlet valve. Use only new hoses and apply thread seal tape.
  4. Connect Drain Hose: Route the drain hose to the sink drain or garbage disposal with a high loop to prevent backflow.
  5. Electrical Connection: Connect to a properly grounded 120V, 60Hz, 15A dedicated circuit. Follow local electrical codes.
  6. Level the Dishwasher: Adjust the leveling legs to ensure the dishwasher is level from front to back and side to side.
  7. Secure to Countertop: Use mounting brackets to secure the dishwasher to the underside of the countertop.
  8. Test Run: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Warning: All installations must be performed by a qualified installer to ensure proper operation and maintain warranty coverage.

Specifications

Model Number WDF330PAHS
Type Built-In Dishwasher
Color Stainless Steel / Black
Place Settings 14 Place Settings
Noise Level 49 dB
Control Type Electronic Touch Controls
Energy Rating ENERGY STARĀ® Certified
Water Consumption 3.2 gallons per cycle
Power Requirements 120V, 60Hz, 15A
Dimensions (HxWxD) 34.5 x 23.75 x 24.5 inches
Weight 105 lbs
Soil Sensor Yes - Smart Wash Technology

Warranty Information

  • Full Warranty: 1 year parts and labor
  • Motor Warranty: 10 years on Direct Drive Motor
  • Racks Warranty: Lifetime on stainless steel tub and rack
  • Additional Coverage: Optional extended warranty available

For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com

Key Features

Third Level Rack

Extra upper rack provides additional space for cutlery, utensils, and small items, maximizing loading capacity and flexibility.

Hard Food Disposer

Built-in food disposer grinds up food particles during the wash cycle, eliminating the need for pre-rinsing dishes.

Smart Wash Technology

Advanced sensors automatically adjust water temperature, cycle time, and wash action based on soil level for optimal cleaning.

Stainless Steel Interior

Durable stainless steel tub resists stains, odors, and corrosion while providing superior cleaning performance and energy efficiency.

Quiet Operation

Sound insulation and advanced motor technology provide quiet operation at only 49 dB, perfect for open-concept living spaces.

Cycle Options

Multiple cycle options including Normal, Heavy, Light, Rinse Only, and Sanitize cycles for versatile cleaning performance.

Wash Cycle Options

Normal Wash

Standard cycle for everyday dishes with normal soil levels

Heavy Wash

Intensive cleaning for pots, pans, and heavily soiled items

Light Wash

Gentle cycle for lightly soiled dishes and delicate items

Rinse Only

Quick rinse to prevent dried-on food until full load is ready

Sanitize

High-temperature cycle that eliminates 99.9% of bacteria

Delay Start

Set dishwasher to run during off-peak energy hours

Troubleshooting

Problem Possible Cause Solution
Dishwasher won't start Power issue, door not closed properly, child lock engaged Check power supply, ensure door is latched completely, check child lock
Poor cleaning results Overloading, wrong detergent, clogged spray arms Reduce load size, use correct detergent, clean spray arms
Water not draining Drain hose clogged, air gap blocked Check drain hose for obstructions, clean air gap
Leaking water Door not sealed, overfilling, loose connections Check door seal, ensure proper detergent amount, check connections
Unusual noises Foreign objects in pump, spray arm hitting dishes Check for foreign objects, rearrange dishes properly
Dishes not drying Rinse aid empty, heating element issue Refill rinse aid, check heating element operation

Error Codes

  • F1: Water supply issue - Check water supply and inlet valve
  • F2: Drain issue - Check drain hose and pump
  • F3: Temperature sensor issue - Contact service center
  • F4: Heating element issue - Contact service center
  • F5: Motor control issue - Contact service center
  • F6: Control panel communication error - Reset dishwasher

Manual Downloads

Current Model Manuals

WDF330PAHS

Built-In Dishwasher with Third Rack

WDF540PADM

Built-In Dishwasher with PrintShield

WDT730PAHZ

Built-In Dishwasher with Sensor Cycle

WDP370PAHW

Built-In Dishwasher with Hard Food Disposer

Popular Previous Models

WDF520PADM

Built-In Dishwasher with Third Rack

WDT710PAHZ

Built-In Dishwasher with Sensor Cycle

WDF750SAHZ

Built-In Dishwasher with Top Control

WDT910SAHZ

Built-In Dishwasher with CrystalDry

Note: For models not listed here, please visit the Whirlpool Support Website for complete documentation.