Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
- 4-inch diameter rigid metal or flexible metal duct
Step-by-Step Installation
- Choose Installation Location: Select a location with proper ventilation, near electrical outlet, and on a solid, level floor.
- Remove Shipping Materials: Remove all shipping bolts and packaging materials from the dryer.
- Install Exhaust Duct: Connect 4-inch diameter rigid metal or flexible metal duct to dryer exhaust outlet.
- Ventilation Setup: Route exhaust duct to outdoors, keeping duct as straight and short as possible.
- Electrical Connection: Connect to a properly grounded 120V, 60Hz, AC only outlet. Do not use an extension cord.
- Level the Dryer: Adjust the leveling legs to ensure the dryer is level from front to back and side to side.
- Test Run: Run the dryer through a complete cycle to check for proper operation and ventilation.
Specifications
| Model Number | WDF330PAHS0 |
| Type | Front Load Electric Dryer |
| Color | Stainless Steel |
| Capacity | 7.4 cu. ft. |
| Noise Level | 68 dB |
| Control Type | Electronic Controls with LED Display |
| Energy Rating | ENERGY STAR® Certified |
| Power Requirements | 120V, 60Hz, 24A |
| Dimensions (HxWxD) | 74.5 x 66.7 x 73.9 cm |
| Weight | 72.6 kg |
| Drum Material | Stainless Steel |
| Exhaust Requirements | 4-inch diameter rigid metal duct |
Warranty Information
- Full Warranty: 1 year parts and labor
- Motor Warranty: 10 years on dryer motor
- Drum Warranty: Lifetime limited warranty on stainless steel drum
For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com
Key Features
Advanced Moisture Sensing
Automatically senses when clothes are dry and shuts off, preventing over-drying and saving energy while protecting your fabrics.
Wrinkle Shield™ Option
Keeps clothes moving periodically after the cycle ends to help prevent wrinkles from setting in when you can't unload immediately.
AccuDry™ System
Monitors temperature and moisture levels throughout the cycle to deliver consistent drying performance and optimal fabric care.
Steam Refresh Cycle
Uses steam to reduce wrinkles and odors in 20 minutes, refreshing clothes that have been sitting in the dryer or closet.
Sanitize Cycle
Eliminates 99.9% of common household bacteria and dust mites using high temperatures, perfect for bedding and towels.
Quiet Operation
Sound insulation and advanced motor technology provide quiet performance, ideal for open living spaces.
Drying Programs
Auto Dry
Automatically adjusts drying time based on moisture levels for optimal results
Timed Dry
Manual drying with selectable time from 10 to 180 minutes
Quick Dry
Fast drying cycle for small loads in just 30 minutes
Delicates
Gentle drying with low heat for delicate fabrics
Heavy Duty
Extended drying time with high heat for heavily wet items
Air Fluff
No heat cycle for fluffing pillows or refreshing clothes
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dryer won't start | Power issue, door not closed properly, control lock activated | Check power supply, ensure door is latched completely, check control lock setting |
| Clothes not drying | Lint filter clogged, exhaust duct blocked, overloaded | Clean lint filter, check exhaust duct, reduce load size |
| Taking too long to dry | High humidity, restricted airflow, small loads | Check ventilation, clean lint filter and exhaust system |
| Unusual noises | Foreign objects in drum, worn rollers or belts | Check for foreign objects, inspect drum components |
| Error codes displayed | Sensor issues, motor problems, electrical faults | Refer to error code chart, reset dryer, contact service if persistent |
| Vibration during operation | Unbalanced load, uneven floor, shipping bolts not removed | Redistribute load, level the dryer, ensure shipping bolts removed |
Error Codes
- F01: Main control communication error - Reset dryer
- F02: Motor control communication error - Check connections
- F03: Motor triac error - Contact service center
- F05: Moisture sensor error - Clean sensor bars
- F07: Heater error - Check heating element
- F09: Temperature sensor error - Contact service center
Manual Downloads
Current Model Manuals
WDF330PAHS0
7.4 cu. ft. Electric Dryer
WDF330PASB0
7.4 cu. ft. Electric Dryer
WGD330PAHS0
7.4 cu. ft. Gas Dryer
WGD330PASB0
7.4 cu. ft. Gas Dryer
Popular Previous Models
WED4800EQ0
7.0 cu. ft. Electric Dryer
WED4900BW0
7.0 cu. ft. Electric Dryer
WGD4800EQ0
7.0 cu. ft. Gas Dryer
WGD4900BW0
7.0 cu. ft. Gas Dryer