Whirlpool WDT730PAHV

User Manual & Installation Guide

Built-In Dishwasher

Installation Guide

Tools Needed:

  • Adjustable wrench
  • Screwdrivers (flat and Phillips)
  • Level
  • Pliers
  • Tape measure
  • Drill with bits

Step-by-Step Installation

  1. Choose Installation Location: Select a location near plumbing and electrical connections with proper cabinet dimensions.
  2. Remove Packaging Materials: Remove all shipping materials and protective coverings from the dishwasher.
  3. Connect Water Supply: Connect hot water supply line to the water inlet valve. Use only new hoses.
  4. Connect Drain Hose: Route the drain hose into the sink drain or garbage disposal with a high loop to prevent backflow.
  5. Electrical Connection: Connect to a properly grounded 120V, 60Hz, dedicated circuit. Follow local electrical codes.
  6. Level the Dishwasher: Adjust the leveling legs to ensure the dishwasher is level from front to back and side to side.
  7. Secure to Countertop: Use mounting brackets to secure the dishwasher to the underside of the countertop.
  8. Test Run: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Warning: All installations must be performed by a qualified installer to ensure proper operation and maintain warranty coverage.

Specifications

Model Number WDT730PAHV
Type Built-In Dishwasher
Color Stainless Steel / Black
Place Settings 14 Place Settings
Noise Level 50 dB
Control Type Electronic Touch Controls
Energy Rating ENERGY STARĀ® Certified
Water Consumption 3.2 gallons per cycle
Power Requirements 120V, 60Hz, 15A
Dimensions (HxWxD) 34.5 x 23.75 x 24.5 inches
Weight 105 lbs
Wash Cycles 6 Wash Cycles

Warranty Information

  • Full Warranty: 1 year parts and labor
  • Motor Warranty: 10 years on drive motor
  • Racks Warranty: Lifetime on stainless steel tub and racks
  • Additional Coverage: Optional extended warranty available

For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com

Key Features

Third Level Rack

Extra upper rack provides additional space for silverware, utensils, and small items, maximizing loading capacity and flexibility.

Soil Sensor

Advanced sensor technology automatically detects soil levels and adjusts water temperature and cycle time for optimal cleaning performance.

Power Clean Cycle

High-pressure spray jets and extended wash time tackle tough, baked-on food soils on pots, pans, and casserole dishes.

Quiet Operation

Sound insulation and advanced motor technology provide quiet operation at just 50 dB, allowing for use during family time.

Hard Food Disposer

Built-in food disposer grinds up food particles, eliminating the need to pre-rinse dishes before loading.

Sanitize Cycle

High-temperature final rinse kills 99.9% of food soil bacteria, providing hygienically clean dishes for your family.

Wash Cycles Explained

Normal Wash

Standard cycle for everyday dishes with normal soil levels

Heavy Wash

Intensive cleaning for pots, pans, and heavily soiled items

Light Wash

Quick cycle for lightly soiled dishes and glassware

Rinse Only

Rinses dishes to prevent drying of food soils until full load

Sanitize

High-temperature wash and rinse for hygienic cleaning

Delay Start

Delays cycle start for off-peak energy hours or convenience

Troubleshooting

Problem Possible Cause Solution
Dishwasher won't start Power issue, door not closed properly Check power supply, ensure door is latched completely
Poor cleaning results Overloading, wrong detergent, spray arms blocked Reduce load size, use correct detergent, clean spray arms
Water not draining Drain hose clogged or kinked, filter blocked Check drain hose for obstructions, clean filter
Leaking water Door not sealed, overfilling, loose connections Check door seal, ensure proper detergent amount, check connections
Unusual noises Foreign objects in pump, spray arm hitting dishes Check for foreign objects, reposition dishes
Dishes not drying Rinse aid empty, high humidity, plastic items Refill rinse aid, use heated dry cycle, separate plastic items

Error Codes

  • F1: Water supply issue - Check water supply and inlet valve
  • F2: Drain issue - Check drain hose and pump
  • F3: Temperature sensor issue - Contact service center
  • F4: Water overflow detected - Check for leaks and water supply
  • F5: Motor issue - Contact service center
  • F6: Heater issue - Contact service center

Manual Downloads

Current Model Manuals

WDT730PAHV

Built-In Dishwasher with Third Rack

WDT750PAHV

Built-In Dishwasher with Sensor Dry

WDT970SAHV

Built-In Dishwasher with Top Control

WDT730PAHW

White Built-In Dishwasher

Popular Previous Models

WDF750SAYM

Built-In Dishwasher with Hard Food Disposer

WDT720PADM

Built-In Dishwasher with Third Rack

WDT910SAYM

Built-In Dishwasher with Top Control

WDF760SADM

Built-In Dishwasher with Sensor Cycle

Note: For models not listed here, please visit the Whirlpool Support Website for complete documentation.