whirlpool wdt730pahz0 service manual troubleshooting

Service Manual & Troubleshooting Guide

WDT730PAHZ0 Dishwasher

Installation Guide

Tools Needed:

  • Adjustable wrench
  • Level
  • Screwdrivers (flat and Phillips)
  • Pliers
  • Tape measure
  • Pipe thread seal tape

Step-by-Step Installation

  1. Choose Installation Location: Select a location near necessary plumbing and electrical connections on a solid, level floor under counter.
  2. Remove Shipping Materials: Remove all shipping bolts and packaging materials from the dishwasher.
  3. Connect Water Supply: Connect hot water supply line to the water inlet valve. Use only new hoses and apply pipe thread seal tape.
  4. Connect Drain Hose: Route the drain hose into sink drain or garbage disposal with a high loop to prevent backflow.
  5. Electrical Connection: Connect to a properly grounded 120V, 60Hz, AC only outlet. Do not use an extension cord.
  6. Level the Dishwasher: Adjust the leveling legs to ensure the dishwasher is level from front to back and side to side.
  7. Test Run: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Warning: All installations must be performed by a qualified installer to ensure proper operation and maintain warranty coverage.

Specifications

Model Number WDT730PAHZ0
Type Built-In Dishwasher
Color Stainless Steel / Black
Place Settings 14 Place Settings
Noise Level 46 dB
Control Type Touch Controls with LCD Display
Energy Rating ENERGY STARĀ® Certified
Water Consumption 2.9 gallons per cycle
Power Requirements 120V, 60Hz, 15A
Dimensions (HxWxD) 34.5 x 23.75 x 24.5 inches
Weight 85 lbs
Wash Cycles 5 Wash Cycles

Warranty Information

  • Full Warranty: 1 year parts and labor
  • Motor Warranty: 10 years on Direct Drive Motor
  • Rack Warranty: Lifetime on stainless steel tub and rack
  • Additional Coverage: Optional extended warranty available

For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com

Key Features

Power Clean Plus

Advanced wash system with targeted spray jets that remove tough, baked-on food with powerful cleaning action.

Third Level Rack

Additional top rack provides extra space for utensils and small items, increasing loading capacity and flexibility.

Soil Sensor

Automatically detects soil levels and adjusts water temperature and cycle time for optimal cleaning performance.

Hard Food Disposer

Built-in food disposer grinds up food particles, eliminating the need for pre-rinsing dishes.

Quiet Operation

Sound insulation and advanced motor technology provide quiet operation at only 46 dB.

Sanitize Cycle

NSF certified sanitize cycle eliminates 99.999% of food soil bacteria for hygienically clean dishes.

Wash Cycle Options

Normal Wash

Everyday cycle for normally soiled dishes with optimal cleaning and energy efficiency

Heavy Wash

Intensive cleaning for pots, pans, and heavily soiled dishes with extra hot water

Light Wash

Quick cycle for lightly soiled dishes or glassware with reduced water and energy use

Rinse Only

Rinses dishes without detergent to prevent drying of food particles

Sanitize

High-temperature wash that eliminates bacteria and ensures hygienic cleanliness

Delay Start

Delays cycle start for up to 24 hours to run during off-peak energy hours

Troubleshooting

Problem Possible Cause Solution
Dishwasher won't start Power issue, door not closed properly, child lock engaged Check power supply, ensure door is latched completely, check child lock
Poor cleaning results Overloading, wrong detergent, clogged spray arms Reduce load size, use correct detergent, clean spray arms
Water not draining Drain hose clogged or kinked, drain pump issue Check drain hose for obstructions or kinks, clean drain pump
Leaking water Door not sealed, overfilling, loose connections Check door seal, ensure proper detergent amount, check connections
Unusual noises Foreign objects in pump, spray arm hitting dishes Check for foreign objects, rearrange dishes properly
Dishes not drying Rinse aid empty, heating element failure Refill rinse aid, check heating element operation

Error Codes

  • F1E1: Water supply issue - Check water supply and inlet valve
  • F2E1: Drain issue - Check drain hose and pump
  • F3E1: Heating issue - Check heating element and thermostat
  • F4E1: Motor issue - Contact service center
  • F5E1: Door switch issue - Ensure door is fully closed and latched
  • F6E1: Control board issue - Reset power or contact service
  • F7E1: Temperature sensor issue - Check temperature sensors
  • F8E1: Water temperature issue - Check water heater settings

Manual Downloads

Current Model Manuals

WDT730PAHZ0

Built-In Dishwasher with Third Rack

WDT730PAHZ1

Built-In Dishwasher with Stainless Steel

WDT730PAHZ2

Built-In Dishwasher with Black Interior

WDT730PAHZ3

Built-In Dishwasher with Fingerprint Resistant

Popular Previous Models

WDT710PAHZ0

Built-In Dishwasher 2019 Model

WDT750SAHZ0

Built-In Dishwasher with Stainless Steel

WDT970SAHZ0

High-End Built-In Dishwasher

WDF760SAHZ0

Front Control Dishwasher

Note: For models not listed here, please visit the Whirlpool Support Website for complete documentation.