Whirlpool WDT750SAKZ Dishwasher

Installation Manual & User Guide

Built-in Dishwasher

Installation Guide

Tools Needed:

  • Adjustable wrench
  • Level
  • Screwdrivers (flat and Phillips)
  • Pliers
  • Tape measure
  • Drill with bits
  • Pipe cutter

Step-by-Step Installation

  1. Prepare Installation Area: Select a location near necessary plumbing and electrical connections. Ensure cabinet opening meets required dimensions.
  2. Remove Shipping Materials: Remove all shipping bolts, tape and packaging materials from the dishwasher.
  3. Connect Water Supply: Connect hot water supply line to the water inlet valve. Use only new braided stainless steel supply lines.
  4. Connect Drain Hose: Route the drain hose to drain connection with high loop to prevent backflow into dishwasher.
  5. Electrical Connection: Connect to a properly grounded 120V, 60Hz, 15A dedicated circuit. Follow local electrical codes.
  6. Level the Dishwasher: Adjust the leveling legs to ensure the dishwasher is level from front to back and side to side.
  7. Secure to Countertop: Use mounting brackets to secure dishwasher to underside of countertop.
  8. Test Run: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Warning: All installations must be performed by a qualified installer to ensure proper operation and maintain warranty coverage.

Specifications

Model Number WDT750SAKZ
Type Built-in Dishwasher
Color Stainless Steel / Black
Place Settings 14 Place Settings
Noise Level 46 dBA
Control Type Touch Controls with LED Display
Energy Rating ENERGY STARĀ® Certified
Water Consumption 2.9 gallons per cycle
Power Requirements 120V, 60Hz, 15A
Dimensions (HxWxD) 33.75 x 23.56 x 24.56 inches
Weight 105 lbs
Wash Cycles 6 Wash Cycles

Warranty Information

  • Full Warranty: 1 year parts and labor
  • Motor Warranty: 10 years on Direct Drive Motor
  • Rack Warranty: Lifetime on stainless steel tub and rack
  • Additional Coverage: Optional extended warranty available

For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com

Key Features

Third Level Rack

Extra top rack provides additional space for utensils and small items, maximizing loading capacity and flexibility.

Soil Sensor

Advanced sensor technology detects soil levels and automatically adjusts cycle time and water usage for optimal cleaning efficiency.

Power Clean Cycle

High-pressure spray jets and extended wash time remove tough, baked-on food from pots, pans, and casserole dishes.

Quiet Operation

Sound insulation and precision engineering provide quiet 46 dBA operation, allowing use during family time without disruption.

Stainless Steel Interior

Durable stainless steel tub resists stains, odors, and corrosion while providing superior cleaning performance.

Hard Food Disposer

Built-in food disposer grinds up food particles, eliminating the need for pre-rinsing dishes before loading.

Wash Cycles Explained

Normal Wash

Standard cycle for everyday dishes with normal soil levels

Heavy Wash

Intensive cleaning for pots, pans, and heavily soiled items

Light Wash

Quick cycle for lightly soiled dishes and glassware

Rinse Only

Rinses dishes to prevent drying of food particles

Power Clean

High-pressure cleaning for tough, baked-on foods

China/Crystal

Gentle cycle for delicate items and fine china

Troubleshooting

Problem Possible Cause Solution
Dishwasher won't start Power issue, door not closed properly Check power supply, ensure door is latched completely
Poor cleaning results Overloading, wrong detergent, incorrect loading Reduce load size, use correct detergent, ensure proper loading
Water not draining Drain hose clogged or kinked Check drain hose for obstructions or kinks, clean filter
Leaking water Door not sealed, overfilling, loose connections Check door seal, ensure proper detergent amount, check connections
Unusual noises Foreign objects in spray arms, unbalanced load Check for foreign objects, redistribute load evenly
Dishes not drying Heated dry turned off, rinse aid empty Enable heated dry, refill rinse aid dispenser

Error Codes

  • F1: Water supply issue - Check water supply and inlet valve
  • F2: Drain issue - Check drain hose and pump
  • F3: Temperature sensor issue - Contact service center
  • F4: Water overflow detected - Check for leaks and water supply
  • F5: Motor issue - Contact service center
  • F6: Control panel communication error - Reset dishwasher

Manual Downloads

Current Model Manuals

WDT750SAKZ

Built-in Dishwasher

WDT730SAKZ

Built-in Dishwasher

WDT710SAHZ

Built-in Dishwasher

WDT790SAKZ

Built-in Dishwasher

Popular Previous Models

WDF760SADM

Built-in Dishwasher

WDT920SAKZ

Built-in Dishwasher

WDF540PADM

Built-in Dishwasher

WDT970SAHZ

Built-in Dishwasher

Note: For models not listed here, please visit the Whirlpool Support Website for complete documentation.