Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
- Pipe wrench
Step-by-Step Installation
- Choose Installation Location: Select a level, solid floor location near water supply and drain connections with proper ventilation.
- Remove Shipping Materials: Remove all shipping bolts, brackets and packaging materials from the dryer unit.
- Gas Connection (if applicable): Connect gas line using approved piping and fittings. Apply pipe joint compound to all threaded connections.
- Ventilation System: Install 4-inch diameter metal venting material. Ensure proper exhaust to outdoors with minimal bends.
- Electrical Connection: Connect to a properly grounded 120V, 60Hz, AC only outlet. Gas models require standard 120V outlet.
- Level the Dryer: Adjust the leveling legs to ensure the dryer is level from front to back and side to side.
- Test Run: Run the dryer through a complete cycle to check for proper operation, heating and ventilation.
Specifications
| Model Number | WDTA50SAHZ |
| Type | Gas Dryer |
| Color | White |
| Capacity | 7.0 cu. ft. |
| Energy Source | Natural Gas |
| Control Type | Electronic Controls with LED Display |
| Energy Rating | ENERGY STAR® Certified |
| Voltage Requirements | 120V, 60Hz |
| Gas Requirements | Natural Gas, 5" W.C. Pressure |
| Dimensions (HxWxD) | 43 x 29 x 30 inches |
| Weight | 125 lbs |
| Vent Size | 4 inches |
Warranty Information
- Full Warranty: 1 year parts and labor
- Drive Motor Warranty: 10 years limited warranty
- Drum Warranty: Lifetime limited warranty
- Additional Coverage: Optional extended warranty available
For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com
Key Features
AccuDry™ Temperature Control
Advanced temperature sensing technology that automatically adjusts drying time and temperature to prevent over-drying and protect fabrics.
Wrinkle Shield™ Option
Keeps clothes moving periodically after the cycle ends to help prevent wrinkles from setting in when you can't unload immediately.
Steam Refresh Cycle
Uses steam to help reduce wrinkles and odors in lightly worn clothes, refreshing them between washes and saving time and energy.
Advanced Moisture Sensing
Precision sensors detect moisture levels and adjust drying time accordingly, ensuring optimal drying while saving energy.
Quiet Operation
Sound insulation and balanced drum system provide quiet operation, making it ideal for open floor plans and living areas.
Large Capacity
7.0 cubic foot capacity allows you to dry larger loads, including bulky items like comforters and blankets with ease.
Drying Cycles Explained
Auto Dry
Automatically senses dryness level and shuts off when clothes are dry
Timed Dry
Manual drying with selectable time from 10 to 180 minutes
Wrinkle Control
Tumble without heat to help reduce wrinkles in dry clothes
Air Fluff
No heat cycle for freshening pillows, stuffed animals and delicates
Quick Dry
Reduced drying time for small, lightly damp loads
Heavy Duty
Extended drying with higher heat for heavily wet items
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dryer won't start | Power issue, door not closed properly, start button not held | Check power supply, ensure door is latched completely, hold start button for 3 seconds |
| Clothes not drying | Vent blockage, gas supply issue, overloaded | Check vent system, verify gas supply, reduce load size |
| Long drying times | Restricted venting, high humidity, heavy loads | Clean vent system, check humidity levels, separate heavy items |
| No heat | Gas supply off, thermal fuse blown, igniter failure | Check gas valve, test thermal fuse, inspect igniter |
| Unusual noises | Foreign objects in drum, worn rollers, blower wheel issue | Check for foreign objects, inspect rollers and blower wheel |
| Vibration during operation | Unbalanced load, uneven floor, shipping bolts not removed | Redistribute load, level the dryer, ensure shipping bolts removed |
Error Codes
- F01: Control board communication error - Power cycle unit
- F02: Motor control error - Check for obstruction, reset unit
- F03: Temperature sensor error - Check sensor connections
- F05: Thermal cutoff error - Check venting, reset if cool
- F07: Heater error - Check heating element and connections
- F09: Moisture sensor error - Clean sensor bars, check connections
Manual Downloads
Current Model Manuals
WDTA50SAHZ
7.0 cu. ft. Gas Dryer
WED50SAHZ
7.0 cu. ft. Electric Dryer
WGD50SAHZ
7.0 cu. ft. Gas Dryer with Steam
WED50SBHZ
7.0 cu. ft. Electric Dryer Black
Popular Previous Models
WGD94HEAW
7.4 cu. ft. Gas Dryer
WED94HEAW
7.4 cu. ft. Electric Dryer
WGD72HEDW
7.2 cu. ft. Gas Dryer
WED72HEDW
7.2 cu. ft. Electric Dryer