Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
- 4-inch diameter rigid metal duct
Step-by-Step Installation
- Choose Installation Location: Select a location with proper ventilation, near electrical connection on a solid, level floor.
- Remove Shipping Materials: Remove all shipping bolts and packaging materials from the dryer unit.
- Ventilation Setup: Install 4-inch diameter rigid metal ducting to exterior vent. Avoid flexible plastic ducts.
- Gas Connection (if applicable): Connect gas line using approved pipe joint compound. Check for leaks with soap solution.
- Electrical Connection: Connect to a properly grounded 120V, 60Hz, AC only outlet. Do not use an extension cord.
- Level the Dryer: Adjust the leveling legs to ensure the dryer is level from front to back and side to side.
- Test Run: Run the dryer through a complete cycle to check for proper operation and ventilation.
Specifications
| Model Number | WDTA50SAHZ0 |
| Type | Electric Dryer |
| Color | White |
| Capacity | 7.0 cu. ft. |
| Noise Level | 65 dB |
| Control Type | Electronic Controls with LED Display |
| Energy Rating | ENERGY STAR® Certified |
| Power Requirements | 240V, 60Hz, 30A |
| Dimensions (HxWxD) | 43 x 27 x 29 inches |
| Weight | 125 lbs |
| Drum Material | Stainless Steel |
| Vent Requirements | 4-inch diameter rigid metal duct |
Warranty Information
- Full Warranty: 1 year parts and labor
- Drum Warranty: 10 years on stainless steel drum
- Additional Coverage: Optional extended warranty available
For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com
Key Features
Advanced Moisture Sensing
Automatically detects when clothes are dry and shuts off, preventing over-drying and saving energy while protecting your fabrics.
Wrinkle Shield™ Option
Periodically tumbles clothes without heat after the cycle ends to help prevent wrinkles from setting in.
AccuDry™ System
Monitors temperature and moisture levels throughout the cycle to ensure consistent drying results load after load.
Stainless Steel Drum
Durable stainless steel construction resists chipping and rusting, providing long-lasting performance and gentle fabric care.
ENERGY STAR® Certified
Meets strict energy efficiency guidelines set by the EPA, using less energy and helping to protect the environment.
Multiple Dry Cycles
Offers specialized cycles for different fabric types including Heavy Duty, Delicates, Quick Dry, and Air Fluff options.
Cycle Options Explained
Heavy Duty
High heat setting for towels, jeans, and heavily soiled items
Delicates
Low heat setting for delicate fabrics and special care items
Quick Dry
Reduced drying time for small loads that need fast results
Air Fluff
No heat tumbling to freshen pillows, stuffed animals, and draperies
Wrinkle Control
Extended tumbling with cool down period to reduce wrinkles
Sanitize Cycle
High temperature cycle to eliminate bacteria and allergens
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dryer won't start | Power issue, door not closed properly, cycle not selected | Check power supply, ensure door is latched completely, select cycle |
| Clothes not drying | Overloading, lint filter clogged, vent blocked | Reduce load size, clean lint filter, check vent system |
| Dryer is noisy | Foreign objects in drum, unbalanced load | Check for foreign objects, redistribute load evenly |
| Dryer stops during cycle | Overheating, power interruption | Check venting, allow to cool, check power connection |
| Error codes displayed | Various system faults | Refer to error code chart in manual, contact service if needed |
| Vibration during operation | Unbalanced load, uneven floor | Redistribute load, level the dryer |
Error Codes
- F01: Control board communication error - Power cycle unit
- F02: Motor triac error - Check for obstruction, contact service
- F03: Thermistor open circuit - Contact service center
- F04: Thermistor short circuit - Contact service center
- F05: Heater relay error - Contact service center
- F07: Motor relay error - Check for obstruction, contact service
Manual Downloads
Current Model Manuals
WDTA50SAHZ0
7.0 cu. ft. Electric Dryer
WGD50SAHZ0
7.0 cu. ft. Gas Dryer
WED50SAHZ0
7.0 cu. ft. Steam Dryer
WGD70SAHZ0
7.4 cu. ft. Gas Dryer
Popular Previous Models
WED4815EW
7.0 cu. ft. Electric Dryer
WGD4815EW
7.0 cu. ft. Gas Dryer
WED4850HW
7.0 cu. ft. Steam Dryer
WGD6620HW
7.0 cu. ft. Gas Dryer