Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
- 4-inch diameter rigid metal duct
Step-by-Step Installation
- Choose Installation Location: Select a location with proper ventilation and adequate clearance on all sides. Ensure floor is solid and level.
- Remove Shipping Materials: Remove all shipping bolts and packaging materials from the dryer.
- Gas Connection (if applicable): Connect gas line using approved flexible connector. Check all connections for leaks with soap solution.
- Electrical Connection: Connect to a properly grounded 120V, 60Hz, AC only outlet. Do not use an extension cord.
- Ventilation System: Install 4-inch diameter rigid metal ducting. Avoid flexible plastic ducts. Ensure proper exterior venting.
- Level the Dryer: Adjust the leveling legs to ensure the dryer is level from front to back and side to side.
- Test Run: Run the dryer through a complete cycle to check for proper operation and ventilation.
Specifications
| Model Number | WDTA50SAKZ |
| Type | Gas Dryer |
| Color | Stainless Steel |
| Capacity | 7.0 cu. ft. |
| Noise Level | 68 dB |
| Control Type | Electronic Controls with LED Display |
| Energy Rating | ENERGY STAR® Certified |
| Gas Requirements | Natural Gas |
| Power Requirements | 120V, 60Hz, 15A |
| Dimensions (HxWxD) | 43 x 29 x 30 inches |
| Weight | 125 lbs |
| Vent Requirements | 4-inch diameter |
Warranty Information
- Full Warranty: 1 year parts and labor
- Motor Warranty: 10 years on dryer motor
- Additional Coverage: Optional extended warranty available
For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com
Key Features
Advanced Moisture Sensing
Automatically detects when clothes are dry and shuts off, preventing over-drying and saving energy while protecting your fabrics.
Wrinkle Shield™ Option
Keeps clothes moving periodically after the cycle ends to help prevent wrinkles from setting in when you can't unload immediately.
AccuDry™ Temperature Control
Monitors temperature throughout the cycle to provide consistent drying performance and protect your clothes from heat damage.
Steam Refresh
Uses steam to help reduce wrinkles and odors in 20 minutes, refreshing clothes without a full wash cycle.
Large Capacity Drum
7.0 cubic foot capacity handles large family loads, including bulky items like comforters and blankets with ease.
Quick Dry Cycle
Dries small loads in as little as 30 minutes, perfect for when you need specific items dried quickly.
Drying Programs
Auto Dry
Automatically adjusts drying time based on moisture levels for optimal results
Timed Dry
Manual drying with selectable time settings from 10 to 180 minutes
Wrinkle Control
Tumbles clothes without heat at cycle end to prevent wrinkles
Steam Refresh
Uses steam to reduce wrinkles and odors in 20 minutes
Quick Dry
Fast drying for small loads in 30-40 minutes
Heavy Duty
Extended drying time for large, heavily soiled loads
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dryer won't start | Power issue, door not closed properly, start button not held | Check power supply, ensure door is latched completely, hold start button for 3 seconds |
| Clothes not drying | Lint filter clogged, venting blocked, gas supply off | Clean lint filter, check venting system, ensure gas supply valve is on |
| Overheating | Ventilation blocked, lint buildup | Clear ventilation system, clean lint filter and exhaust duct |
| Unusual noises | Foreign objects in drum, worn rollers or belts | Check for foreign objects, inspect rollers and belts for wear |
| Gas odor | Gas leak, improper combustion | Immediately turn off gas supply and contact qualified technician |
| Error codes displayed | Various system faults | Refer to error code chart in manual or contact service |
Error Codes
- F01: Control board communication error - Power cycle unit
- F02: Motor triac error - Check motor operation
- F03: Thermistor open circuit - Check temperature sensor
- F04: Thermistor short circuit - Replace temperature sensor
- F05: Heater error - Check heating element
- F07: Motor stalled - Check for obstruction, restart
Manual Downloads
Current Model Manuals
WDTA50SAKZ
7.0 cu. ft. Gas Dryer
WED50SAKZ
7.0 cu. ft. Electric Dryer
WDTA75SAKZ
7.5 cu. ft. Gas Dryer
WED75SAKZ
7.5 cu. ft. Electric Dryer
Popular Previous Models
WGD48S0SW
7.0 cu. ft. Gas Dryer
WED48S0SW
7.0 cu. ft. Electric Dryer
WGD72S0SW
7.2 cu. ft. Gas Dryer
WED72S0SW
7.2 cu. ft. Electric Dryer